A wide variety of mechanical components to help build, support and move whatever you need.
Valin offers a complete line of Mobile Robots, Articulated Robots, Parallel Robots, Cartesian Robots, SCARA Robots and Table Top Robots.
Safety Light Curtains, Safety Laser Scanners, Safety Switches & Operator Controls, Perimeter Guarding
Whether you need push/pull motion or rotational motion, Valin has you covered. Cleanroom types and splash-proof/ dust-proof types available.
Indicating lights and sound alarms enhance the safety and efficiency of workplaces. HMI systems give operators complete centralized control
Advanced motion control products for the semiconductor, defense, automotive, aerospace, biomedical, and packaging industries.
Sensors detect, measure, analyze, and process various changes that occur on productions sites, such as changes in position, length, height, displacement, and appearance.
Networking is the glue that holds many control systems together. It is the road over which we can best take advantage of the capabilities of modern-day control systems. Today, we can get any information you want from wherever it is to wherever you want it. We use a variety of technologies to develop these solutions.
Advanced motion control products for the semiconductor, defense, automotive, aerospace, biomedical, and packaging industries.
Switches, electrical and industrial components for Motion Control & Automation project needs
Valin works with several world-class manufacturers who provide a number of quality, cost-effective and unique solutions. They cover a wide range of types and form-factors of gearheads
Available in 92-270mm frame sizes, MPP motors feature a segmented lamination design providing a very high torque to inertia ratio resulting in the highest acceleration rates of any Parker motor. Parker can provide custom modifications to all MPP motors.
The ETH design offers unrivaled power density due to larger screw and bearing designs in smaller packages. User-friendly and offered in a diversified range of configurations.
The eCL system is an innovative closed loop stepper motor and controller that utilizes motor mounted feedback to constantly monitor shaft position. Actual motor shaft position data is updated every 25 microseconds allowing the drive to compensate for sudden load changes ensuring accurate position control.
This industrially hardened cylinder product utilizes an all-steel contruction and achieves far greater thrust capacities than typical electric cylinders. Maximum thrust up to 356,000N (80,000lbs).
Parker’s I-Force Ironless Linear Motors offer high forces and rapid accelerations in a compact package. With forces ranging from 24.5 N (5.5 lbf) to 878.6 N (197.5 lbf) continuous up to 108.5 N (24.5 lbf) to 3928 N (883 lbf) peak, the I-Force family offers a superior combination of performance and size.
Our new Generation II Stealth® Series provides higher radial load, increased service life and ease of mounting than comparably sized planetary gearheads.
Stealth® MultiDrive (MD) offers three different output options for true flexibility.
NEMA gearheads feature a high-efficiency spur gear design, in a light, compact package, and are ideal for applications requiring smooth operation and low starting torque. Ratios from 3:1 to 100:1 are available.
Stealth® Gearmotors represent the first time a brushless servo motor and a helical planetary gearhead have been integrated into a single product.
The perfect solution for obsolete SVD (Slit Valve Door) pneumatic EV manifolds 0010-20052 & 0010-70297 on your aging fleet of Endura process tools.
Valin's drop-in pneumatic manifold replacement is a perfect solution for your obsolete gas box pneumatic manifolds on your aging fleet of Centura and Centura Ultima process tools.
Pneumatic actuators provide cost-effective and simple motion control. Valin works with a wide variety of types, load ratings and standards including…
Valin offers comprehensive Vacuum technology solutions for the Automation Industry through various individual components that are needed to set up your vacuum systems.
SMART Hydraulic Actuators fuse the power of hydraulics with the precision of servo control.
Valin's drop-in pneumatic manifold replacement is a perfect solution for your obsolete chamber pneumatic manifolds on your aging fleet of Centura and Centura Ultima process tools.
The AV03/AV05 pneumatic directional control valves are smaller, lighter, and more efficient than similar valves.
Aventics (ASCO™ NUMATICS) directional control line of valves are available in a wide range of port sizes and Cv flow capacity.
ES05 is a valve system that has been designed especially for standard pneumatics applications and industrial automation.
Aventics CL03 Series is the ideal valve system for pneumatic solutions in the food industry.
Configurable valve systems, Multipole, Fieldbus
The CCL-IS CleanLine air cylinders meet ISO 15552 standards and feature a cleaner profile design than competitor’s cylinders.
The AVENTICS™ Series CCL-IC cylinders with their compact and clean design can be used in a wide range of applications.
The ICS D2 versions are suitable for food processing with 304 grade Stainless Steel.
The CSL-RD (ISO 6432) has a smooth profile and low surface roughness made of stainless steel.
The S Series is a stainless steel NFPA Interchangeable pneumatic cylinder line.
The AF2 series flow rate sensor monitors air consumption in pneumatic systems, enabling fast action in case leaks are detected.
The Microstage 28 product line was designed with performance and price in mind.
The Microstage 42 product line was designed with performance and price in mind.
The Twintrac product line was designed with performance and price in mind. The base of the Twintrac is a precision machined extrusion.
EZQUAD Servo was designed to allow the rapid implementation of multi axis servo motor solutions in products requiring automation.
The EZQUAD HR Stepper is a 4 Axis 256 micro stepping Driver + Controller measuring only 2.25" x 2.25" x 1.0
The EZSV17WV Servo Motor Controller was designed to allow the rapid implementation of Brushless DC motor or Brush DC Motor solutions in products requiring automation.
The EZStepper was designed to allow the rapid implementation of stepper motor solutions in products requiring automation.
The ASCO™ Series 065 is a family of miniature solenoid valves designed for analytical and diagnostic equipment.
The ASCO™ Series 076 is a line of miniature solenoid valves designed for use with air and inert gases.
The ASCO™ Series 088 solenoid valves are designed for use with air and inert gases.
The ASCO™ Series 090 is a line of miniature solenoid valves designed for use with air and inert gases.
The ASCO™ Series 096 direct acting miniature solenoid valves are customizable and suitable for a wide range of OEM applications.
The ASCO™ Series 188 solenoid valves are designed to control air and inert gases.
The ASCO™ Series 411 line of miniature solenoid valves deliver up to twice as many cycles of reliable, repeatable performance.
ASCO™ Series L256 general purpose valves are designed to control water, air, inert gases, steam and non-aggressive fluids.
In today's highly automated machines, the AVENTICS™ Series G3 electronic fieldbus valve system is replacing conventional hardwired solutions.
The AVENTICS™ Series 580 fieldbus communications node supports up to 128 AVENTICS 500 Series solenoid valves per valve system in a compact package.
The AVENTICS™ Series AES fieldbus connection can be integrated into all AVENTICS fieldbus-compatible valve systems or can also be configured as a stand-alone solution.
The ASCO™ Series 226 fluidic control valves are designed to handle both liquid and gases in analytical and medical device instruments.
The ASCO™ Series 226 fluidic control valves are designed to handle both liquid and gases in analytical and medical device instruments.
Series 226 proportional valves are designed to proportionally control the flow of neutral and aggressive liquids and gases.
The ASCO™ Series 226 fluidic control valves are designed to handle both liquid and gases in analytical and medical device instruments.
The ASCO™ Series 226 fluidic control valves are designed to handle both liquid and gases in analytical and medical device instruments.
The ASCO™ Series RB is a line of miniature solenoid valves designed for use with air and inert gases.
The ASCO™ Series S are miniature general service solenoid valves designed for use with air and inert gases.
The ASCO™ Series 068 flapper isolation valve is designed for use with neutral or aggressive liquids and gases.
The ASCO™ Series 068 flapper isolation valve is designed for use with neutral or aggressive liquids and gases.
The ASCO™ Series 038 miniature solenoid valves offer isolated fluid control.
Flapper proportional valves are designed to proportionally control the flow of neutral and aggressive liquids and gases.
The ASCO™ Series 202 Preciflow solenoid valves are designed to precisely control the flow rates in medical equipment and analytical instrumentation.
The ASCO™ Series 202 Preciflow solenoid valves are designed to precisely control the flow rates in medical equipment and analytical instrumentation.
The ASCO™ Series 202 Preciflow IPC solenoid valves are designed to proportionally control the flow of air and inert gases.
The ASCO™ Series 614 SentronicPLUS is a 3-way digitally operated pressure regulator valve.
The ASCO™ Series 630 Piezotronic valves with proportional control are designed for analytical and diagnostic equipment applications.
The ASCO™ Series 908 electronic control unit converts analog input control signals to the coil current of a proportional solenoid valve by means of pulse-width modulation.
The ASCO™ Series 055 are PTFE fluid isolation valves designed for use with highly aggressive liquids.
The Direct acting solenoid valve for use with neutral or aggressive liquids in analytical instruments.
The ASCO™ Series 067 is a line of rocker solenoid fluid isolation valves for use with neutral or aggressive liquids and gasses.
ASCO™ Series 082 is a line of miniature solenoid valves designed for use with neutral or highly aggressive liquids.
The ASCO™ Series 110 is a line of rocker solenoid fluid isolation valves for use with neutral or highly aggressive liquids.
The ASCO™ Series 252 are dental manifold assemblies that reduce dental delivery system complexity.
The ASCO™ Series 283 lever mechanism isolation valves are ideally suited for quickly flushing systems of corrosive media.
The ASCO™ Series 385 rocker isolation valves are designed for use with the neutral or highly aggressive liquids used in analytical instrumentation.
The ASCO™ Series 045 is a line of 2-way and 3-way normally closed and normally open solenoid-operated pinch valves.
ASCO™ Series S170-S370 pinch valves can control any fluids that is compatible with the tubing material.
The ASCO™ Series 284 of solenoid pinch valves are designed for use with highly aggressive or high-purity.
The ASCO™ Series 384 is an aluminum body, solenoid-operated pinch valve designed for use with highly aggressive or high-purity liquids.
The ASCO™ Numatics disposable in-line filters include the PL Series polyurethane straight and nylon dual-barbed styles, plus the PT Series nylon straight style.
ASCO™ High Purity In-Line Filters offer pleated filter elements to remove solid particles.
Parker's OSPE SB ball screw driven rodless actuator is a cost effective solution designed for light to medium industrial applications.
Parker's OSPE ST trapezoidal (lead) screw driven rodless actuator is a cost effective solution designed for light to medium industrial applications.
The OSPE-B Belt Actuator is designed to be Parker's most versatile yet cost-effective point to point positioner.
The Parker OSPE BHD belt driven actuator is the highest performing Series from the Origa System Plus family.
Parker's mSR 80 is a miniature, high precision linear positioner.
The mSR 100 is a miniature, high precision linear positioner which uses dual precision grade square rails for its guidance.
Valin offers miniature solenoid valves that are critical in the analytical and medical industries.
The Numatics Series 12 is a line of miniature pneumatic filters, regulators, and lubricators ideal for applications requiring clean air in a limited space.
The AVENTICS™ Series 651, 652, 653 is an easy-to-install line of pneumatic filters, regulators, and lubricators (FRLs).
AVENTICS™ Series QR2, push-in connectors with easy, secure mounting are available in many versions.
AVENTICS™ Series TU1 offers a broad range of plastic materials and colors to fit with your tubing application.
AVENTICS™ Series TU2 Duo plastic tubing in PUR are suitable for dynamic laying and can be partially or continuously bonded.
AVENTICS™ Series QR1 push-in connectors with easy, secure mounting are available in many versions.
SiteManager is the advanced IoT edge gateway component that enables industrial remote access and machine data collection with edge computing functions in a single unit.
Secomea's DCC combines data collection and remote access in a single device.
The Secomea GateManager is an industrial gateway server empowering you to securely manage remote access to industrial control systems and equipment.
Data Collection is the next step in a journey that started with sensors, controls and networking. Creating data is pointless unless it is collected. Learn more below about technologies useful for collecting that data.
The Industrial Internet of Things is ushering in a digital transformation that enables companies to exploit technology and expertise better than ever before.
Series MNI round cylinders for general machine construction are characterized by its robust and long service life.
The AVENTICS™ Series CCI (ISO 21287) cylinders stand for innovative, compact construction and an easy to clean design.
The AVENTICS™ Series SSI are short stroke cylinders in accordance with the latest ISO standard 15524.
The AVENTICS™ Series 167 is a tie rod cylinder offers the highest robustness for tough environment.
The AVENTICS™ Series C12P is a cylinder Series according the standard CNOMO NFE 49-001 and offer a replacement for existing application.
The AVENTICS™ Series PRA offers a direct mounting for SM6-AL sensor to achieve a perfect distance measurement.
Valin enclosure, panel, and integrated assembly solutions greatly simplify the challenge of designing and engineering your fluid automation system.
The AVENTICS™ Series SWN is a cartridge cylinder and thus can be implemented into a tight space.
The AVENTICS™ Series L01 is a line of direct solenoid actuated pneumatic valves designed for high cycle-rate machine applications.
The AVENTICS™ Series L1 air valves offer speed and high flow capacity in a compact design.
The AVENTICS™ Series L2 valve line offers speed and high flow capacity in a compact design. Its slim, 1-inch body width is ideal for in-line mounting.
The Numatics Series Mark 3 is a line of high-flow miniature directional control valves.
The Numatics Series Mark 8 is a line of pneumatic directional control valves designed for repeatable and reliable use in harsh or challenging environments.
The Numatics Series Mark 15 is a line of directional control valves that combines high flow capacity with a compact design.
The Numatics Series Mark 55 valve line is designed for repeatable and reliable performance in harsh and challenging environments.
The ASCO Numatics Series 140 is a line of directional control valves with high-flow capacity (Cv to 16.5).
The AVENTICS™ Series 589 have a robust polymer housing that can be mounted individually or as a block.
The AVENTICS™ Series LS04 are lightweight spool valves and save space with their polyamide and aluminium housing. The valves are suitable for direct mounting onto moving machines and system parts.
The AVENTICS™ Series ES05 is ideal for standard pneumatic applications. Its simplicity and modularity make it especially well-suited for applications that require quick changes or extensions.
The AVENTICS™ Series TC08 valve system is the perfect choice for applications calling for lightweight valves with high flow rate in a small space.
The AVENTICS Series CD consists of various spool valves with an extremely durable die-cast zinc housing.
The AVENTICS Series CD consists of various spool valves with an extremely durable die-cast zinc housing.
The AVENTICS Series TC15 valve system is the perfect choice for applications calling for lightweight valves with high flow rate in a small space.
The AVENTICS™ Series CD consists of various spool valves with an extremely durable die-cast zinc housing.
The AVENTICS™ Series 740/840 feature directional valves with soft, abrasion-free diaphragm technology.
The AVENTICS™ Series 740/840 feature directional valves with soft, abrasion-free diaphragm technology.
The AVENTICS™ Series AP offers a wide range of poppet valves with aluminium housing.
The AVENTICS™ Series ST offers a comprehensive range of spool valves with hardened stainless steel housing.
The AVENTICS™ Series ICM is a mini cylinder and cost-efficient solution for high corrosion resistance and reliability.
The ASCO Numatics Series 437 is a line of double-acting pneumatic tie-rod cylinders.
The Numatics Series NRL is a generation of linear, static locking devices that achieve new levels of performance.
AVENTICS™ Series CERAM Size 1 Directional Valves are designed for superior performance.
AVENTICS™ Series CERAM Size 2 Directional Valves are designed for superior performance.
AVENTICS™ Series CERAM Size 3 Directional Valves are designed for superior performance.
The AVENTICS™ Series AS3-SV consist of redundant 3/2 valves with external pilot and spring return according to the requirements of ISO 13849-1-2 for safety functions safe exhaust” and prevention against unexpected start-ups”.
The AVENTICS™ Series 581 complies with the valve standard ISO 5599-1. Due to the level of modularity, the Series offers all valve functions, integrated throttle valves, various pilot coils, and a comprehensive range of accessories.
The AVENTICS™ Series 581 complies with the valve standard ISO 5599-1. Due to the level of modularity, the Series offers all valve functions, integrated throttle valves, various pilot coils, and a comprehensive range of accessories.
AVENTICS™ Series 581 offers all valve functions, integrated throttle valves, various pilot coils, and a comprehensive range of accessories.
The AVENTICS Series 563/565/567 have an aluminium housing, and are suited for assembly on single or manifold subbases and offer flow rate performances of up to 13620 l/min with a working pressure of up to 30 bar.
The AVENTICS Series 563 018/131 are manually operated poppet valves with a flow rate of 300 l/min (Series 563 018) and 1100 l/min (Series 563 131). With their simple and robust design they are always ready for applications and easy to operate even with work gloves.
The AVENTICS Series 490/579/589 have a robust polymer housing that can be mounted individually or as a block. They cover a large range of voltages and feature fast connections for pneumatic tubing.
AVENTICS™ Series AV03/AV05 provides a reliable basis for both compact handling systems and complex automation solutions.
The AVENTICS™ Series 608/609 SentronicD is a 3-way, direct-operated proportional valve with digital control for air or neutral gas.
The AVENTICS™ Series 615 Servotronic Digital is a highly dynamic 3-way proportional valve with digital control.
The AVENTICS™ Series 616 SentronicHD is a highly accurate 3-way valve with digital control.
The AVENTICS™ Series 617 Sentronic LP is a family of highly efficient and cost-effective proportional valves.
The AVENTICS™ Series ED02 is a compact and powerful offering precise control solutions in a variety of applications.
The AVENTICS™ Series ED05 ensures sensitive pressure control.
The AVENTICS™ Series ED07 offers proportional pressurization.
The AVENTICS Series ED12 offers proportional pressurization.
The AVENTICS™ Series EV03 is ideal for applications requiring infrequent pressure adjustments.
The AVENTICS™ Series EV12 with its compact design hides its large flow capacity.
The AVENTICS™ Series EV18 is a family of highly efficient and cost-effective proportional valves.
The AVENTICS™ Series 614 SentronicPLUS is a 3-way digitally operated pressure regulator valve.
AVENTICS™ hydraulic cylinders are designed for operation with clean, petroleum-based hydraulic fluid.
The AVENTICS™ Series A is a rugged aluminum NFPA interchangeable pneumatic cylinder.
The AVENTICS™ Series CD01-PA is the flexible valve system according to ISO 15407-1.
The AVENTICS™ Series PRA (ISO 15552) cylinders have a compact design profile with integrated sensor slots.
The AVENTICS™ Series TRB (ISO 15552) cylinders are among the most frequently implemented in industries where heavy duty cylinders are required.
The AVENTICS™ Series ITS (ISO 15552) cylinders are often chosen when extremely large loads need to be moved.
The Numatics® F Series is a Non-Rotating NFPA Interchangeable pneumatic cylinder line that provides the solution to specific applications
where piston rotation is not acceptable.
The AVENTICS™ Series RPC round profile cylinders offer a wide variety of connection options
The AVENTICS™ Series M is a stainless steel body air cylinder line that is the ideal solution for value-based designs.
The AVENTICS™ Series KPZ is a compact cylinders based on the widely used standard NFE 49 004.
The AVENTICS™ Series KHZ is a non-standard short-stroke cylinder ideal for tight installation spaces.
The ASCO™ Numatics Series 441 is a line of robust, compact short-stroke pneumatic cylinders.
The Numatics Series NB is a line of compact barrel cylinders that have competitive interchangeability with other rodless cylinder products.
The AVENTICS™ Series CVI is a cylinder valve unit with two ISO cylinder Series and five freely combinable valve Series.
The AVENTICS™ Series RTC rodless cylinders offer optimized stroke length in a compact size.
AVENTICS™ Series GSU cylinders are the ideal basis for many handling systems.
The AVENTICS™ Series CKP cylinders provide sturdy, ultra-precise guiding with excellent repeatability.
The Numatics Series CGT is a compact guide slide that is ideal when high load and force are required.
The Numatics Series PST precision slide tables provide smooth linear motion with high accuracy.
The Numatics Series SPS small power slides are ideal for pneumatic applications with tight spaces.
The ASCO™ Series 445 is a family of rodless pneumatic cylinders with magnetic coupling.
The Numatics Series RM rotary module uniquely transfers air pressure through fixed ports to rotating parts on its rotary platform.
The Numatics Series PBS power block slides are designed for pneumatic applications where space is at a minimum.
The AVENTICS™ Series GS gantry slides are designed for pneumatic systems that handle heavier loads and travel greater distances.
The AVENTICS™ Series LCX is an economical line of linear slides with greater load carrying capabilities.
The AVENTICS™ Series SH guided linear slide is a motion device capable of heavy loads and moderately long strokes.
The AVENTICS™ Series LC slides provide cost-effective light-duty guided linear motion in pneumatic cylinder applications.
The AVENTICS™ Series GPC is distinguished by high side load capacity and torsion protection.
The AVENTICS™ Series MSC mini slides have a compact design, require minimal space and can be configured for any automated handling task.
The AVENTICS™ Series TWC is a compact and powerful cylinder with its double piston offering also an high non-rotating accuracy.
The AVENTICS™ Series RCM with its rotary modules can perform all standardized rotary and swivel movements.
The AVENTICS™ Series TRR is a rotary cylinder based on two ISO cylinders and a rack and pinion gearbox.
The AVENTICS™ Series RAK is an efficient and easy way to generate torque from compressed air.
The Numatics Series SC swing clamps combine linear and rotary motions.
The Numatics Series LR is a rotary actuator that incorporates a low-profile rack and pinion design.
The Numatics Series R is a line of heavy-duty, rack and pinion-style rotary actuators.
The Numatics Series AR is a low-profile, compact rotary actuator for pneumatic control systems.
The Numatics Series RW 90-degree rotary actuators are designed with two independent piston cylinders.
The AVENTICS™ Series BCP cylinders are bellow actuators with firmly flanged steel covers and bellows made of natural rubber in the standard version.
The AVENTICS™ Series BCC cylinders are bellow cylinders with removable mounting parts.
The AVENTICS™ Series BCR bellow cylinders are designed for applications that require very high forces.
The AVENTICS™ Series BRB cylinders are the cost-optimized variant for lower loads.
The Numatics Series FE feed escapement device incorporates two double-acting cylinders that are cross-ported and internally sequence.
The AVENTICS™ Series RDC is flexible diaphragm cylinders with low friction, and can be actuated at low pressure.
The AVENTICS™ Series 102 is cost-efficient solution to generate high forces for press application for example.
The Numatics Series KG is a robust air cylinder line that is designed to perform in the most demanding valve automation applications.
The AVENTICS™ Series ACCU is an economical pneumatic linear actuator line that contains an internal linear resistive transducer.
The AVENTICS™ Modular scraper system for Series PRA/TRB and ITS cylinders offer more flexibility.
The AVENTICS™ Series LU1 is a holding unit using eccentric movement to hold the piston rod in any position.
The AVENTICS™ Series LU6 is a mechanical locking unit/brake for piston rods in pneumatic cylinders.
The AVENTICS™ Series SA1 industrial shock absorbers decelerate reliably moving masses.
The AVENTICS™ Series SA2 industrial shock absorbers were created for AVENTICS™ actuators.
The AVENTICS™ Series 370 industrial shock absorbers decelerate reliably moving masses.
The AVENTICS™ Easy-2-Combine mounting interface with interlocking connections combine the mini slide, rodless cylinders and rotary modules into multi-axis systems.
The AVENTICS™ Series ST6 sensors are suitable for mounting in the 6 mm T-slot as well as sensor mounting to the cylinder.
The AVENTICS™ Series ST4 sensors can be integrated with all AVENTICS™ pneumatic actuators.
The AVENTICS™ Series ST4-2P sensors measure two switching points in a 50 mm range using one sensor in a 4 mm C-slot.
AVENTICS™ Series SC4 are magnetic sensors for use in tight spaces.
The AVENTICS™ Series SN2 sensors are compatible with a range of cylinders.
AVENTICS™ Series SN3 are magnetic sensors ideal for demanding environments.
AVENTICS™ Series SN5-X are Magnetic Sensor that responds to ferromagnetic material.
The AVENTICS™ Series ST9 sensors are specifically developed for short-stroke cylinders.
The AVENTICS™ Series SM6 are analog distance measuring sensors.
The AVENTICS™ Series SM6-AL are analog distance measuring sensors.
The AVENTICS™ Series PowerMaster® NFPA cylinders are heavy duty pneumatic and hydraulic NFPA steel cylinders.
The AVENTICS™ Series TaskMaster™ has been enhanced with ideal cushioning.
The AVENTICS™ Series MCR is a line of magnetically coupled rodless pneumatic cylinders.
The C Series is a robust compact cylinder line designed to fit tight space requirements.
Heat and shock resistance make this sensor perfect for demanding applications.
The ASCO Numatics Series 280 digital sensors can be used as digital pressure-vacuum gauges for accurate visual display.
The AVENTICS™ Series PM1 is a compact pressure switch for measuring compressed air and non-aggressive gases.
The AVENTICS™ Series PE2 is a resistant and robust pressure sensor.
Made of welded stainless steel, plastic chain and belts, Dorner's food processing conveyors are designed for fast, safe sanitation in any environment.
Sensors that can withstand frequent and intensive cleaning and disinfecting cycles in an injection molding environment.
The AC-150-2473 Endura TxZ Remote Gas Box pneumatic EV manifold is a 10-station manifold with 2x3/2 pneumatic valves (20 valves total).
FR-D700 is Mitsubishi Electric’s class-leading range of micro drives.
The FR-F800 is a pump and fan control VFD optimized for maximum energy saving.
A pulse press is an actuator combining a stepper motor and load cell, that is capable of performing power control.
PowerGate ‘H’ Series HVAC Controllers offer the simplicity and functionality of an HVAC bypass controller and the high specification, performance and reliability of the Mitsubishi Electric FR-F800 VFD.
High-torque, 2-phase bipolar stepper motors and geared type stepper motors offer the optimum performance and value.
Single-use technologies enable biopharmaceutical companies to achieve a faster time-to-market and reduction in operational costs.
The Accuriss 28, as the name implies, is 28mm square. The product is available in three stack lengths, with holding torques ranging from 8.3 to 16.7 oz. in.
The Accuriss 42, as the name implies, is 42mm square. The product is available in four stack lengths, with holding torques ranging from 45 to 106 oz. in. The Accuriss 42 mounting is the standard NEMA 17 mount.
The Accuriss 57, as the name implies, is 57mm square. The product is available in three stack lengths, with holding torques ranging from 75 to 260 oz. in.
USAutomation's VersaDrive 11 leadscrew step motors were designed to be the most versatile linear positioning motors on the market.
USAutomation's VersaDrive 17 leadscrew step motors were designed to be the most versatile linear positioning motors on the market. Based on a NEMA 17 hybrid step motor, they are available in thru-screw and fixed screw versions with a variety of drive nut and support bushing options.
USAutomation's VersaDrive 23 leadscrew step motors were designed to be the most versatile linear positioning motors on the market. Based on a NEMA 23 hybrid step motor, they are available in thru-screw and fixed screw versions with a variety of drive nut and support bushing options.
Out of the control cabinet and into the field: WAGO's new EPSITRON® IP67 Power Supply brings energy directly where it is needed thanks to a robust design and high degree of protection.
Cleanroom specification and dust/splash-proof specification added in cost-effective IXP Series giving more variations to the lineup.
Digitalization in this global economy has become necessary for modern manufacturing facilities. Companies are leveraging Cloud services to optimize their production systems. Real-time data collection, an important part of this process, can be a daunting process.
From miniature conveyors moving small medical products to large tote systems for prescription fulfillment applications, Dorner has a wide variety of medical solutions.
Cleanroom specification and dust/splash-proof specification added in cost-effective IXP Series giving more variations to the lineup.
Optimum power supply for the sophisticated automation solution with IO-Link communication interface
With the new PGL-plus-P, SCHUNK is introducing a flexible and robust powerhouse that shines above all else for its increased safety. The pneumatic gripper is the first in the world to have GripGuard certified safe gripping force maintenance.
The NACQ Series Compact Cylinder by Airtac is the perfect drop-in replacement for compact cylinders.
The AVENTICS Series SPRA electric rod-style actuators are the ideal solution to perform fast and powerful linear movements. They are very flexible, precise and energy efficient, improving sustainability and Total Cost of Ownership (TCO).
Notifies network information immediately by light, sound, and voice. Convert text data to voice message with the Text to Speech function.
Support arm systems CP40/60/120/180 are for use in the static load range from 400 to 1800 N. Endless combination options with a wide variety of functions. Reliable cable protection for all applications. The support arm configurator is the perfect planning tool for fast, secure design of the support arm to your application.
The GAF Series filters have low pressure loss and efficiency in separating water and large drain blow capacity.
The GAR Series Regulator has a clip and magnifier that is used to save installation space.
The GAL Series Lubricator makes the adjustment of oil supply more reliable.
The GPR Series Precision Regulator has high pressure regulating accuracy.
The levers on the WAGO MULTI CONNECTION SYSTEM MINI (MCS MINI) provide rapid in-the-field connections. The connector’s design facilitates wiring subassemblies – easy-to-access and straightforward connection points - make all the difference at the worksite.
The GPF Series Oil Mist filter has high oil mist remove efficiency.
The GPFR Series Precision Filter and Regulator have a unique structure that separates the liquid from the air.
The 4V Series solenoid valve has three positions with three central functions.
The M3 Series control valve is operated manually, owning control joints with several structure forms.
The M5 Series control valve has metal joints for a long service life and are more reliable with a steady performance.
The HLH Series slide table cylinder is suitable for precision assembly.
The HLQ Series slide table cylinder has a recirculating linear ball bearing that achieves high precision and high rigidity.
The HLS Series is a compact slide table cylinder with cross roller bearings.
The NPB Series Mini Cylinder by AirTAC has a compact structrure, small volume and is light weight.
The HFZ Series air gripper has an integrated design with a linear guide rail, high rigidity, and high precision.
The HFK Series air gripper is a roller bearing, parallel style with a guide track.
The HFP Series air gripper is designed to reduce the cost under the premise of accuracy.
The CPV10 Series terminal valves are 3 position, 2-way valves.
The CPV15 Series Micro solenoid valves have multi-direction installation and a polarless circuit design.
The 6V Series solenoid valves (5/2 Way, 5/3 Way) with electrical entry is terminal, horizontal, and vertical.
The NACF Series round compact cylinder has a convenient and fast fix sensor switch.
The NSU Series is a standard cylinder manufactured by the NFPA Standard.
The AlphaStep AZ Series stepper motors offer high efficiency, low vibration and incorporates our newly developed Mechanical Absolute Encoder for absolute-type positioning without battery back-up or external sensors to buy.
Compact, high-rigidity electric linear slides with simple, dust-resistant structure providing the high response, low vibration and hunting-free operation of a stepper motor in an electric linear slide.
The AlphaStep EAC Series electric linear actuators are quick and responsive and incorporate a ball screw design, offering high performance from low speed to high speed or with light loads or heavy loads, regardless of demanding operating conditions.
The DGII Series is a line of of products that combine a high rigidity hollow rotary table with an AlphaStep absolute encoder AZ series closed loop stepper motor and driver package.
The DR/DRS2 Series compact linear cylinder uses the AlphaStep AZ Series stepper motor and driver. The actuator is equipped with the Mechanical Absolute Encoder Stepper Motor.
The Rack and Pinion System L Series- AZ Series Equipped is a linear actuator in which a rack and pinion mechanism with a motor have been combined.
The VRL series is the all-rounder in the planetary gearbox marketplace. With helical gearing, robust internal construction, smooth operation and high torque density, this product is truly best-in-class.
The ERH series is a compact, robust cycloidal reducer designed for servo applications. This product features high reduction ratios in a compact form factor.
To expand the potential configurations and overall solutions that NIDEC-SHIMPO could offer their customers, they have developed an impressive right-angle planetary gearbox offering.
Take your robot to the next level with FLEXWAVE. NIDEC-SHIMPO has a history of supplying the leading robotics and machine tool manufacturers in Japan.
NIDEC-SHIMPO has been at the forefront of developing gear technology to fulfill the requirements of our OEM customers. Our close partnerships with our installed customer base provided much insight into their evolving need for more high-precision right-angle gearing options.
The STH is an excellent fit for mid-range index table applications that require high accuracy, flexible mounting and a large hollow shaft. This product sets the standard for rotary positioning performance of large inertia loads at an exceptional value.
The Ring-cone mechanical variable speed drive was one of the first technologies developed during NIDEC-SHIMPO’s storied past.
A built-in controller at this size resolves all kinds of small air cylinder problems! Select from three types according to the application: Slider, Rod, Table.
Large single-axis types with a 400kg horizontal payload are available now! Mid Support suppresses deflection of the ball screw, making long-stroke and high-speed operations possible.
Made to take the high temperature, high pressure washdowns associated with food processing and other extreme cleaning condition.
Anyone who wants to lift or lower loads with control and without excessive strength relies on the industrial gas springs from ACE.
If ACE gas push type springs cannot be used due to a lack of space, ACE's industrial gas pull type springs come into their own. These compact assistants with body diameters of 0.59“ to 1.57“ (15 to 40 mm) are effective in the direction of traction and work in the opposite way to the principle of gas push type springs.
The ACE hydraulic dampers are similar in appearance to our industrial gas springs but are adjusted in the end position and work differently to the DVC family with individual speed adjusters for the push and pull direction. This provides users with the maximum flexibility.
ACE Hydraulic feed controls are recommended as the perfect solution when sawing, cutting, drilling and in order to prevent the stick-slip effect on pneumatic cylinders.
ACE rotary dampers provide an invisible yet valuable service as a maintenance-free machine element to allow controlled deceleration of rotary or linear movements.
Miniature shock absorbers from ACE are tried-and-tested quality products used in millions of industrial designs throughout the world. They optimize machines in an equally reliable and effective way by decelerating loads quickly and without recoil.
ACE industrial shock absorbers work hard. Their application means moving loads are evenly decelerated over the full stroke. The result: the lowest braking force and shortest braking time.
The heavy industrial shock absorbers from ACE top off the company's offerings in damping technology. This ACE category gives Designers a choice between self-compensating and adjustable machine elements.
The exceedingly successful TUBUS series from ACE is a perfect alternative, when masses don't need to be decelerated to an exact point. Available in more than 140 different versions, the profile dampers are used to slow down masses, particularly under extreme conditions.
With damping pads from the SLAB series, ACE provides solutions to effectively slow down loads impacting large and small surfaces. This means that these products are found in a wide range of damping technologies from ACE where oscillation begins or where damaging impacts in construction designs need to be slowed over a large surface.
Vaccon's air-powered venturi vacuum generators are highly efficient, capable of reaching 28"Hg [948mbar], dirt tolerant, and include a silencer for quiet operation. Lightweight and compact, they can be easily mounted close to the vacuum point for fast response.
The VDF Series is a unique Vaccon innovation that places the vacuum port and exhaust path inline making a straight-through venturi vacuum generator. These compact generators offer high flow rates up to 120 SCFM [3400 LPM] and high vacuum levels up to 25”Hg [847mbar].
The DF Series of high flow material conveying vacuum generators provide a simple, reliable and cost effective method of in-line transfer of bulk materials, complex shapes, individual objects, selvedge.
Vaccon Air Amplifiers easily and safely handle porous objects that many consider too challenging to handle with vacuum. Vaccon air amplifiers are field-adjustable to meet your process or product specifications. With its inline, straight through design – dirt and debris pass right through, there’s no clogging, no downtime.
Robots and robotic tooling help you increase productivity, improve product quality, and reduce costs. The right End-of-Arm Tools (EOAT) can improve both the flexibility and cost effectiveness by working with and complementing the robot. Vaccon designs vacuum tooling using modular components that are compact, lightweight, durable, and easy to assemble. This creates flexible, streamlined End-of-Arm Tooling that works in harmony with the robot.
Vaccon offers a wide range of vacuum cup styles, materials, sizes and capabilities. Fittings in multiple styles are available individually or as a cup assembly for each cup group. The dual durometer and non-marking cups have their own fitting groups.
Designed with large thru bores, Vaccon fittings connect to vacuum cups, vacuum generators and spring levelers ensuring unrestricted vacuum flow for safe material handling operations. For plumbing flexibility, Vaccon offers 9 different fitting groups with various thread sizes.
Designed with large thru bores, Vaccon fittings connect to vacuum cups, vacuum generators and spring levelers ensuring unrestricted vacuum flow for safe material handling operations. For plumbing flexibility, Vaccon offers 9 different fitting groups with various thread sizes.
Poly-vinyl Chloride (PVC) is possibly the most versatile product from the chemical industry. It's used extensively in construction from siding, to wire insulation, to window frames to pipe. With the addition of a plasticizer, the compound becomes quite flexible and an excellent material for clear tubing.
Single tube PU coil tubing provides the extreme flexibility that is necessary for completing a wide range of projects. Its excellent kink resistance and outstanding memory make it the ideal choice for projects that require repeat bending and twisting of the tubing. In addition, the ether-based nature of the polyurethane material allows the spiral tubing to last longer than basic standard plastic tubing products.
Poly tubing, often referred to as PE tubing or polyethylene tubing is a flexible, lightweight, durable and corrosion resistant plastic that can be used for a wide range of liquid, gas and fluid transfer applications. Poly tubing is also FDA approved for use in food and beverage applications. Polyethylene tube is completely safe and is one of the most common PE tubing materials in the world.
Available in a wide variety of shapes and configurations, Camozzi pneumatic fittings are made of brass, technopolymer, and stainless steel for ease of installation on a variety of devices, machines, and tubing where sealed reliability matters.
Control elements represent the core of a pneumatic circuit in which precision and reliability can make the difference. With a vairety of sizes and flow rates, Camozzi valves and solenoid valves are availble to respond to the needs of any industrial sector - designed for maximum performance of flow rate and power consumption.
Pneumatic actuation consists of different product families, both for applications that require linear movements, and for those that require rotary movements. According to the type, Camozzi can offer ISO or non-standardised actuators. All actuators have a modern design and are developed to save space and weight.
Series D is a new valve system that ensures maximum flexibility and productivity across many primary industrial automation processes. It's available in both multipole and serial communication versions.
Made entirely of stainless steel, this valve is the ideal solution for many industrial applications, even when besides high flow rates, the control of viscous fluids is also required. It is available in a range of different versions as well as special models to be installed in applications with flow direction under the poppet, in order to prevent or reduce the water-hammer effect when closing the valve.
The Series QR rotary actuators are cylinders with a double piston, able to provide high torques while ensuring high stability and a precise rotary movement.
The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary movement, generated by a motor, is converted into a linear movement by means of a recirculating ball screw. Available in 6 sizes, the Series 6E has dimensions based on the ISO 15552 standard and it is therefore possible to use the mounting accessories of the pneumatic cylinders.
Series 5E axes are mechanical linear actuators in which the rotary movement generated by a motor is converted into a linear movement by means of a toothed belt. The Series 5E, available in 3 sizes, 50, 65 and 80, is realized by means of a special self-supporting square profile, in which the components have been completely integrated, assuring compactness and light weight. The presence of a recirculating ball guide grants high stiffness and resistance to external loads.
The servo drives DRWB, compact and especially optimized for the brushless Camozzi motors, are completely digital and available in the power classes 100, 400, 750, 1000 W. Equipped with vector mode and the function of Autotuning and containment of vibrations, they are made in such a way to easily perform replacements and to have a two-line alphanumeric display with 4 control keys on the servo drive. A digital pulse interface allows control of the direction, position, speed and torque.
Series DRCS drives, compact and optimised in one size, are capable of controlling all Camozzi Stepper motors with two-phase and micro-stepping feed. The use of the micro-stepping control technology (up to 1/16 of a step) enables the drive to almost replicate a sinusoidal current while considerably reducing the natural resonance of the motor itself.
The Camozzi motors Series MTB have been designed to be connected in an easy and practical way to the new product range within electrical actuation, being able to drive both electromechanical cylinders and axes. The Series MTB of synchronous AC Brushless motors is available with a power of 100, 400, 750, 1000 W.
The new Camozzi motors Series MTS have been designed to be connected in an easy and practical way to the new product range within electrical actuation, being able to drive both electromechanical cylinders and axes.
The Series GB planetary gearboxes, by means of a planetary gear system, enable the reduction of the angular speed and the increase of transmittable torque.
The motion transmission devices are necessary for a proper connection of electromechanical axes and cylinders with motors or gearboxes.
Mencom is the leading manufacturer of circular connectors and our rugged solutions are engineered for reliable performance under the most extreme use in harsh environments.
Mencom offers a wide range of reliable Industrial Networking Solutions for the industry 4.0 Smart Factory applications. Choose from a wide selection including managed, unmanaged, industrial grade, ultra-compact, DIN-rail mount, multi-ports, Power over Ethernet (PoE), gigabit options, and more.
Mencom’s expandable T35 series of Din Rail modules allow you the convenience of mounting a wide variety of connectors to your DIN rail. Also known as “break-out boards” these modules allow the end user to take a pre-molded connection, like a ribbon cable or D-Sub, and easily break it out to individual terminal points.
Mencom Corporation is now offering ILME Rectangular Connectors known for their high-quality construction and reliable connection in the industry. These rectangular connectors include the base, the mating hood and the male and female insert. Applications for these connectors are found in process automation, automotive, robotics, factory automation, and machine tools just to name a few. This solution will help drastically reduce labor time and costs associated with product installation.
The ability to interface with the contents of the cabinet without opening the door prevents a lot of potential safety hazards associated with having an open electrical panel, such as Arc Flash.
The ability to interface with the contents of the cabinet without opening the door prevents a lot of potential safety hazards associated with having an open electrical panel, such as Arc Flash.
In engineering, the term solenoid refers to a variety of transducer devices that convert energy into linear motion. The term is also often used to refer to a solenoid valve, which is an integrated device containing an electromechanical solenoid which actuates either a pneumatic or hydraulic valve, or a solenoid switch. Connectors may either be purchased individually or as part of a molded cable assembly.
A cable gland is a device that allows the user to pass a cable, wire or tube into an enclosure while providing strain relief and sealing out dust, dirt, and liquids.
Distribution solutions are a critical component in electrical installation and control panel design. WAGO’s new Push-Button and Open Tool Slot TOPJOB® S Distribution Terminal Blocks are extremely compact and designed to provide efficient potential distribution from a single terminal block.
The ASCO™ Series 062 rocker isolation valves are designed for use with neutral or highly aggressive liquids.
Featuring an increased maximum width and a heavier payload capacity, the 2700 Series Medium Duty conveyor is designed for material handling, eCommerce, and logistics applications.
The all-new Compact Controller 100 joins WAGO’s award winning line of PLCs. This ultra-compact controller offers powerful programming combined with on-board I/O.
The Intelligent Parker Amplifier or IPA, is a 1.5 axis servo drive/controller based on the ACR control platform.
Optimum performance through slotless motor technology and performance-matched mechanical elements and feedback devices.
The PM-DD servo motor is designed to provide high torque and high accuracy.
The mPR series stage is designed to meet the needs of those seeking very high precision in a compact direct drive product.
Lets you add expansion I/O modules for a high-density, cost-efficient remote I/O solution
Can be combined with over 500 I/O modules of the 750 series to address all your control needs.
Vertical robots are suitable for a broad range of layouts, from transporting machine parts to assembling electrical components.
Streamline the handling of your material using industrial, sanitary, pallet, and flexible conveyors.
Capable of wide range applications assembly of small parts, heavy load handring and packing.
HellermannTyton’s fir tree mounts provide a secure grip in a mounting hole.
HellermannTyton's two piece edge clip with cable tie assemblies are designed to route bundles.
Pro-Duct wiring duct covers are interchangeable among the 3 styles of duct.
Pro-Duct wiring duct covers are interchangeable among the 3 styles of duct.
Pro-Duct wiring duct covers are interchangeable among the 3 styles of duct.
Pro-Duct high-density, slotted-wall wiring duct features narrow fingers equaling a 2 to 1 finger ratio.
Pro-Duct high-density, slotted-wall wiring duct features narrow fingers equaling a 2 to 1 finger ratio.
Pro-Duct high-density, slotted-wall wiring duct features narrow fingers equaling a 2 to 1 finger ratio.
High-density, slotted-wall wiring duct features narrow fingers equaling a 2 to 1 finger ratio.
The 1100 Series conveyor platform is the industry’s smallest conveyor.
General purpose sleeving that resists fraying when cut with ordinary scissors.
The Dorner 2200 Series Belted Conveyors have a low profile design for precise handling of products and small spaces.
Pro-Duct wiring duct covers are interchangeable among the 3 styles of duct.
Designed to offer a durable single-hole mounting.
ShrinkTrak heat shrinkable markers make it easy to mark wire, cable, and other components.
TIPTAGs are halogen free, tear resistant, and lightweight cross laminated polyolefin tags.
Thermal transfer self-laminating labels are a conformable vinyl film with a white printable surface.
Clean Start thermal transfer ribbons have a patented printhead cleaner built right into the ribbon.
Clean Start thermal transfer ribbons incorporate a patented printhead cleaner built right into the ribbon.
The Dorner 2200 Modular Belt conveyors are ideal for applications in metalworking, packaging, assembling and general manufacturing.
Sanitary Vertical Belt Conveyors for Elevating Bulk Products
Dorner’s Precision Move technology is designed to move product to the exact location, at the exact time, in the exact position.
Provide safe, quick access to essential equipment without disrupting the flow of your operation.
Capable of multiple curves as well as inclines and declines on a single conveyor.
The Z-Frame Flat Belt conveyor is low maintenance and saves time.
The Dorner 3200 Belted Conveyors are heavy duty low maintenance fabric belt conveyors.
Dorner 3200 Modular Belt Conveyors have a sleek design, heavy load and high speed capabilities.
Flexible conveyors with pallets for product routing and control.
Dorner 3200 Precision Move conveyors are ideal for precision part movement.
The 3200 Series Conveyors with Intralox ARB Technology use innovative conveyance technology for merging, diverting, and aligning of product.
Dorner AquaGard LP series stainless steel conveyors are for dry, wipe down, and wet applications.
The lift & locate module provides 100 lbs of lift capacity at 90 psi.
Dorner AquaGard 7100 Series is an industry ready stainless steel flexible chain conveyor.
Dorner AquaGard 7350 series stainless steel conveyors are for dry, wipe down, and wet applications.
Dorner AquaPruf conveyors are improving food safety with hygienically engineered stainless steel conveyors.
Precision edge roller pallet & tray handling conveyor.
Dorner AquaPruf VBT sanitary vertical belt conveyors are for elevating bulk products.
Versatile 2-finger gripper for small components for maximum workpiece variety
FR-F800 is a pump and fan control VFD optimized for maximum energy saving.
Brings together advances in quality in one multi-purpose inverter.
Provides an economic painted steel frame paired with Dorner’s commitment to precision conveyance.
Designed to meet the demands of harsh process environments.
Maximize process efficiency by providing precise pressure regulation to downstream instruments.
Highly effective in removal of particles, moisture and oil aerosol from the instrument air.
Designed to control water, air, inert gases, steam and non-aggressive fluids.
Designed to control water, air, inert gases, steam and non-aggressive fluids.
Miniature Monobloc solenoid pilot valves that are suitable for use with air or inert gas.
Designed to proportionally control the flow of air, inert gases, and liquids with high repeatability.
A stand-alone control device used for open-loop, closed-loop, or dual-loop (cascaded) process control.
Designed to control system pressure to a constant maximum set point.
Portable IIoT unit used to analyze and visualize data from pneumatic installations and systems.
With a profile less than 1/2" square, it delivers precision even in thight spots.
Inline splicing connector with lever for all conductor types.
Ideal for device connections in the field, no matter the performance class.
Perfect where space is limited or use of a standard DIN rail isn’t possible.
Slim line power supplies combine exceptional high-power density with excellent efficiency.
Extreme slim-line design (6mm) saves space in your control cabinet.
Maximize space in your control cabinet while providing a high efficiency rating up to 90%.
Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet.
Flexible process data design for simultaneous transmission of several variables.
High-speed, high-precision capabilities help to increase the productivity of your machines.
MR-J5 servo amplifiers allow for high-speed precise control of MR-J5 servo motors.
Integrated and powerful control for demanding applications.
The iQ-F Series is Mitsubishi Electric’s compact control platform with expanded built-in functions.
Rollon’s telescopic slides can support 5000 lbs. extended out 5 feet.
Offers a cost-effective, modular solution for Ethernet remote I/O systems.
Offers a cost-effective, modular solution for Ethernet remote I/O systems.
Long strokes ideal for lifting applications.
MI3000 connects shop floors and IT systems in real time.
The GT27 Series is a top end graphical operator terminal.
A portable handheld graphical operator terminal.
A portable handheld graphical operator terminal.
The GT25 Series is a high performance and cost-effective graphical operator terminal.
The GT25 Open Frame Series is a high-performance graphical operation terminal.
The GT25 Wide Series is a high performance and cost-effective graphical operator terminal.
The GT25 Rugged Series HMI is a damage-resistant terminal built to withstand extreme environments and conditions.
Space-saving four-wire transmitter that isolates and converts a frequency or pulse input to a proportional control signal.
Offers an isolated Ethernet network interface for up to eight differential current input channels.
Mitsubishi Electric’s most advanced and capable VFD solution.
The MR-JET series servo system performs basic functions at a high level and helps increase the productivity of your machines.
MR-J4 amplifiers provide high speed, high accuracy solutions, and one-touch tuning in single and multi-axis formats.
The MR-JE is a flexible and reliable servo solution to make startup and adjustment simple.
FX5S is the ideal controller for simple machines to achieve the greatest cost efficiency for I/O control.
Servo Motors with High-Resolution Encoder
Servo motors for high-speed, high-accuracy, linear drive systems
EC Stopper Cylinder EC-ST11 is ideal as a workpiece-stopper on a conveyor line without air source.
Rotary servo motor with one-touch auto-tuning, vibration suppression, and machine diagnosis functionality.
LM-Series Servo Motors are available with three different core types and one core-less option for max flexibility.
Direct control with the accuracy of a servo motor.
High-speed, high-torque rotary servo motors for fast, precise machine operation.
The FX5UJ is equipped with various built-in functions to improve ease of use.
Perfect for high volume, controlled environment applications where essential features are the only requirement.
Designed for applications where cost or heat issues make mounting the transformer outside the control panel necessary.
Epoxy encapsulated to protect cores and coils against moisture, dirt and industrial contaminants.
Certified internationally, for harsh industrial environments and hazardous locations.
These units range from 750 to 2,000 VA with +80°C temperature rise.
Interleaved copper windings reduce I²R losses and maximize efficiency.
Provides sag immunity, transient suppression and noise tolerance to handle the most demanding applications.
Standard screw terminal connections and optional covers are offered for safety considerations.
Suitable for the most extreme environments, including hazardous locations and off-shore applications.
Compact, rugged power supplies designed to power many of your industrial control and instrumentation devices and equipment.
Fully complies with IEC and NEMA standards and are available with IEC touchproof covers (IP20).
Offers the exceptional reliability and advanced features required for industrial use.
Can be mounted almost anywhere on a machine, conveyor, or wall.
Features varnished coils with class +180°C insulation system and +115° rise under full load.
Boasts one of the highest efficiencies available in the market today, in spite of its small size.
Provide the reliable power needed for industrial equipment and instrumentation devices when AC power is not convenient or accessible.
A robot with 6 degrees of freedom combining 3 cartesian and 3 rotational axes.
ICS(P)B Cartesian configuration type with battery-less absolute encoder equipped as standard.
The ROBO Cylinder® RCP6 Series has been adopted to achieve even higher speeds.
Long stroke slider type ideal for lifting applications.
Perfect for applications where air cylinders are extensively used for conveyor transportation
The MGL-Range are RFID Coded, electromagnetic safety locking switches. They provide a high level of functional safety whilst maintaining a reliable magnetic door interlock.
The MGL-Range are RFID Coded, electromagnetic safety locking switches. They provide a high level of functional safety whilst maintaining a reliable magnetic door interlock.
The MGL-Range are RFID Coded, electromagnetic safety locking switches. They provide a high level of functional safety whilst maintaining a reliable magnetic door interlock.
Extreme protection against climatic influences, vibration, impacts and surge voltages.
Provides precise position, speed, force control, energy efficiency, minimal fluid and compact size.
The photoelectric sensors are for applications where cleaning involves aggressive media and high pressure.
High performance single/dual digital display fiber optic amplifiers.
Fiber optic amplifiers feature dual digital LCD display.
Digital fiber optic amplifier communication converters.
Groove-depth 9 mm photomicro sensors with built-in connector.
Offers various detection type models (finger/hand/hand-body detection) and safety functions.
Offer various detection type models (finger/hand/hand-body detection) and safety functions.
Cobot sander with a 6-axis robotic arm and controller, with 0.1 mm accuracy and process repeatability.
Hinge interlock safety switches are a type of safety switch fitted on the hinge point of a piece of equipment.
SFEN series safety grip type enabling switches are used to manually control operation within a hazardous area.
IDEM’s TouchSafe Two Hand Control panels are designed to provide reliable protection.
Non-contact safety switches are two-part switches that use magnets to close contacts.
Tongue interlock safety switches fit to the leading edge of sliding, hinged or lift off machine guards.
Switches with guard locking to prevent instantaneous opening of the guard.
Safety limit switches offer reliable contacts ensuring accurate positioning of machine elements.
Safety door switches are installed in fences of machines and areas to monitor opening and closing of doors.
See real time diagnostic feedback through the built-in, backlit, easy-to-use keypad.
IP20 Compact Drive for General Purpose Applications 1.5 – 180 kW
IDEM’s emergency stop switches are used to reduce the risk of injury by stopping machinery quickly.
Autonics SF2ER series emergency stop switches stop machine operation during emergency situations.
AVENTICS™ Series 227 is a line of poppet valves for single-acting cylinders, air bellows, and vacuum material handling.
IDEM rope pull switches are an emergency stop switch mounted on machines or conveyors which are not protected by guards.
IDEM Viper SCR-i safety relays have the latest safety standards, simplified wiring, and LED diagnostics.
SFC series safety controllers are used together with safety input devices.
SFC-R series safety controllers are used with safety input devices to provide safe working environments.
Trapped-key interlocking uses locks and keys for sequential control of equipment and machinery to ensure safe operation.
UGB-NET gate access interlock combines solenoid lock monitoring, RFID sensor, machine control functions, and industrial ethernet.
NETBOX has been designed with fully configurable I/O.
Stationary ID Sensors read barcodes, 2D codes and DMC codes precisely and reliably.
Balluff handheld code readers read all common 1D, 2D and stacked barcodes on documents and directly on items.
Balluff's BVS-E Universal vision sensor has powerful contour-based image processing tools.
The BVS-E Advanced vision sensor efficiently and reliably controls production processes.
With Balluff's BVS-E Standard Vision sensors, you control the quantity of your production process.
3D stereo camera with 12 MPixels sensors and integra ted projector for industrial 3D applications.
Machine vision and ID systems are high-end sensors with barcode readers to algorithms that require a separate computer.
Transforming Tooling is a series of arms driven by electric motion.
AVENTICS™ S Series is a stainless-steel NFPA Interchangeable pneumatic cylinder line for the toughest wash down applications.
AVENTICS™ Series TM5 TaskMaster is an NFPA compatible cylinder in profile and tie-rod constructions.
ASCO Series 003 is a molded epoxy solenoid valve manual operator.
Pneumatic cylinders with reinforced piston rod, featuring high resistance to shocks and radial loads.
Pneumatic cylinders with reinforced piston rod, featuring high resistance to shocks and radial loads.
Series E specialty cylinder is a is an economic tie rod cylinder line.
Numatics™ Series GR1400 180° radial grippers feature a double-acting piston.
Numatics Series PG is a line of low-profile grippers with true parallel motion.
Numatics Series GR90 adjustable angular grippers feature a double-acting piston.
Numatics Series RPG grippers have parallel motion generated by a double-acting piston.
Numatics™ Series WG is a line of parallel grippers that achieve synchronous motion.
Numatics™ Series MPG5 is a miniature parallel gripper designed for picking and placing small pieces.
Numatics™ Series WBG parallel grippers utilize independent pistons to open and close its jaws.
Numatics™ Series PG6J80 is a line of six-finger grippers.
Numatics Series NRG is a line of parallel grippers featuring synchronized or compliant motion.
Designed to handle real world angular gripper applications.
The Numatics™ Series TJ three jaw grippers combine a high grip force with a compact design.
ASCO Numatics™ vacuum components and gripping systems permit productivity improvements in automated processes.
FA-M3V, the industry's fastest PLC, achieves incredible CPU scanning speed through the High-speed IPRS design concept, leveraging Yokogawa's Vitesse engine and parallel instruction processing system (PIPS).
The e-RT3 Plus provides "Data Collection", "data analysis", and "control" all in one platform.
Endura Pallet Manifold Upgrade is a complete kit for ease of installation.
The PGN-Plus-P is a universal 2-finger parallel gripper with permanent lubrication.
The MPG-plus is a 2-finger parallel gripper with smooth roller guides of the base jaws.
The Co-act EGP-C is an electric 2-finger parallel gripper certified for collaborative operation.
Universal swivel unit for pneumatic rotating and swiveling movements.
The SWS quick change system is a tool changing system with patented locking system.
Standard Cylinders are a type of cylinder that adheres to ISO standards.
NFPA cylinders adhere to standardized specifications, ensuring interchangeability.
Round pneumatic cylinders are compact, robust, and well-suited for use in confined spaces.
Compact cylinders are for supplying power when workspaces need short stroke lengths.
Rodless cylinders utilize compressed air without the requirement of a piston rod.
Guided cylinders and slides are crucial in applications with a high degree of stability.
Rotary actuators and cylinders are sturdy, space-efficient devices that convert energy into torque.
Bellow cylinders operate without a piston rod or spring return, producing significant force.
Cylinders, rod locking units, and actuators for special applications.
Large selection of grippers that handle materials with maximum precision and reliability.
AVENTICS™ Series 494 position indicator is a detector used with pneumatic cylinders and actuators.
Provides network connectivity support for one or two SDN-D Series.
Gripper designed to pick up batteries in the electric vehicle market.
This Bluetooth enabled system allows for remote indication and monitoring.
The PSA-24/PSA-24L power supply unit is dedicated to controllers which utilize 24 VDC.
IP67/IP69K Rated Signal Tower with M12 Connector.
Signal towers, beacons and worklights built for maximum washdown protection.
Electric Actuators, Industrial Robots, Controllers, 24VDC PSU Teaching Pendants.
Capable of high positioning accuracy, accurate speed control, and capable of limiting the torque generated by the motor.
Provides a reliable basis for both compact handling systems and complex automation solutions.
Provides a reliable basis for both compact handling systems and complex automation solutions.
You were tireless in your support and it will not be forgotten!