800-774-5630available 8am-5pm PST
Level meters for level detection include Radar, Ultrasonic, Hydrostatic & Nuclear applications.
Diaphragm seals are designed for use with pressure gauges, switches, transducers and transmitters.
Automated valves bring significant operational advantages in the areas of process quality, efficiency, safety, and productivity.
ASCO™ solenoid valves control critical flow of air, gas, water, oil, and steam in applications spanning numerous industries.
WIKA's Gas Actuated Thermometers are mechanical temperature measurement devices with lower and adjustable angle connections.
Parker's three-way B Series Ball Valves may be used as diverting or selecting valves for fluids utilized in process and instrumentation applications.
A lower profile is available with ATEX/IECEx Zone 1, Ex ’de’ flameproof.
The 2P15M series pressure switch is designed for high purity wet process installations where 316L stainless steel is not acceptable. Materials of construction include Engineered Plastics such as PFA, PTFE, PFA and Peek.
Parker's SWB Ball Valves are durable valves that can handle the pressure and piping loads in various instrumentation and process applications up to 2,500 PSI.
Parker's Phastite® permanent compression fitting offers an extremely quick, easy and simple way of permanently connecting tube. When considering how much time it takes to weld tubing, Phastite® delivers a huge reduction in total installation cost.
Differential Pressure Flow Meter, Ideal for Liquid, Steam or Gas Measurement
Sentinel & Watchman VPT Rotary Limit Switches provide reliable valve position indication in explosion-proof environments and general purpose applications.
Sharpe® Valves carbon steel, 2-piece ball valves provide superior performance and reliability in the oil patch.
ASCO RCS provides the industry’s best choice for process valve diagnostics and actuation.
The accuracy of digital measurement technology and the simplicity of an analogue gauge are brought together in the GDI-100-D
The Malema BCV-980 is a pinch control valve designed for use with Single-Use flexible tubing systems.
The ASCO Series 273 is a 2-way normally-closed or normally-open pressure-operated pinch valve designed to assure integrity of high-purity liquids in biotechnology, pharmaceuticals, diagnostics, single-use technology (SUT), and food and beverage markets. Typical applications include single-use bioreactors, Tangential Flow Filtration (TFF), and Chromatography skids.
The P90S features an extremely sensitive silicone on silk diaphragm that senses air or inert gas pressure in fractions of an inch of water.
The Stonel Axiom AN / ANX offers unmatched reliability using non-contact position sensing with solid state electronics and contaminant-tolerant pneumatic control. Coupled with its space-efficient design, corrosion resistance and networking/wireless link capability, the AN / ANX offers unrivaled convenience and cost-saving benefits in hazardous and general purpose process applications.
Suitable for the most demanding applications in the oil, gas and process control industries.
High performance 4.5″ ASME style Process pressure gauge with a stainless steel case.
Polymer-seated, flanged ball valves provide superior performance and reliability in a wide range of applications.
Metering Pumps with High-Speed Performance, Dual Bearing Support, Superior Check Valve Performance and High Compression Ratio
Direct acting general service solenoid valves with brass or sainless steel bodies
Valin and WIKA are the ideal partners for solutions in calibration technology.
The GO™ Switch Models 73 and 74 are the world’s most commonly used leverless limit switches.
TopWorx™ Magnetic Target Switch - MTS is a magnetic, target-actuated, barrel-style switch.
Offers accurate and repeatable switching for monitor/control and alarm/shut down protection.
Stonel Eclipse features dual solid state sensors with optional communications neatly integrated into a sealed module. The Eclipse series is available in 3 form factors to meet your application needs. The NEW Ultra compact version for general purpose applications (EC), non-incendive and intrinsically safe versions (EN) for hazardous areas with a removable module and in a general purpose, completely sealed, micro-connector version (EG).
Parker's High Pressure HB Series Ball Valves provide reliable shut-off or switching functions. The upper and lower bearings enhance the resistance of the trunnion design stem against seizure, and increase the valve life in extreme applications.
Sharpe® Valves Series 25 cast flanged swing check valves provide superior performance and reliability.
Polymer-seated, 3-piece ball valves provide a lower cost solution in many applications.
Polymer-seated, 3-piece ball valves provide superior performance in a wide range of applications.
The new Generation 3000 Series combines all the features of a modern electronic pressure, temperature and level switch.
The ASCO two-valve Series 290 has nickel-plated brass bodies and is air pilot operated.
WIKA offers a wide range of level measuring instruments for temperatures up to 840 °F and pressure ranges up to 580 psi.
The GO™ Switch Model 11 features sealed gold flashed contacts, no-touch sensing and snap action response.
Parker Autoclave's F Series are high pressure cone and thread fittings for use in a variety of applications with 1/4" to 1" Parker Autoclave tubing.
The PV48W and PV36W series vacuum high purity pressure switch offers accurate and repeatable switching for monitor/control and alarm/shut down protection.
Parker A-LOK® two ferrule tube fittings are designed to achieve quality leak-free connections on-board hydrogen-powered vehicles up to 350 bar pressures and temperatures down to -40 O C. These fittings provide reliable operation in cryogenic, pressure & thermal cycling and vibration applications.
Designed for multi-turn control of media regulation and shutoff up to 15,000 psi.
Sharpe® Valves 2-piece brass ball valves provide a lower cost solution in many applications.
3-piece ball valves provide a lower cost solution in many applications.
For high-temperature measurements with safety chamber.
One of the first electronic switches priced within the range of mechanical switches.
The 8290 Series consists of 2-way direct acting valves available in normally closed or normally open constructions. Built for demanding applications, these valves come in a straight-through body design made of bronze or stainless steel. There are many optional features including visual/electrical position indicator or a stroke limiter.
The WIKA pressure measurement portfolio contains a number of product lines and is suited to the widest range of applications.
The GO™ Switch Model 7G leverless limit switch offers unique options such as hermetic seal and Double Pole Double Throw (DPDT) contact arrangements.
E48W series high purity pressure switches for measuring pressure points referenced to absolute zero.
Combines the safety of a tamper proof switch, output of a transducer and convenience of a gauge
Designed for applications that require higher flow rate capability.
Non-rotating rising stem design, with working pressures to 20,000 psi
Sharpe® metal-seated gate valves provide superior performance in a wide range of applications.
Polymer-seated, 2-piece CWP ball valves provide a lower cost solution in many applications.
GO™ Switch Model 7J Proximity Sensor takes two proven technologies and combines them into one.
Series 420 general industrial amplified transducers are general purpose, industrial grade transducers, ideal for use when a robust transducer is required.
Wide range of pressure ratings, sizes, and resilient materials provide long service life and low internal leakage.
Regardless of the power industry application, WIKA has the right sensors and transmitters.
The GO™ Switch Model 81 offers end sensing and an optional Double Pole Double Throw (DPDT) contact arrangement.
E17W series high purity pressure switches for measuring pressure points referenced to absolute zero.
Combines the safety of a tamper proof switch, output of a transducer and the convenience of a gauge
Non-rotating rising stem design, with working pressures to 20,000 psi (1379 bar).
Provides unidirectional flow and shut-off for liquids and gases in medium pressure systems
Sharpe® metal-seated gate valves provide superior performance in a wide range of applications.
Direct mount, 3-piece ball valves provide a lower cost, compact, automated solution.
The Series 600 OEM Transducers are the ideal solution for applications that require a low cost, accurate, reliable transducer in a small package.
The XHP high purity transducer is designed for accurate and reliable sensing of process gases in semiconductor product manufacturing.
All-PFA wetted Coriolis flow meter designed for measuring liquids in high-purity applications.
GO™ Switch Model 75 offers a wide application temperature range.
Designed to maximize isolation of the element and the probe from the mounting fitting and shell.
These Parker Autoclave Engineers O-Ring Check Valves CXO Series (HYG option) can withstand temperatures ranging between -73°C and 316°C and pressures of up to 1,380 bar (20,000 psi).
3 valve block and bleed compact system designed for blocking, bleeding, and calibration
Sharpe® metal-seated gate valves provide superior performance in a wide range of applications.
Sharpe® Valves metal-seated, stainless steel, globe valves provide superior performance and reliability.
For smallest size and lowest cost, the CSK series is the switch of choice. The CSK includes pressure ranges from 20-120 psi to 1000-3000 psi.
D48W Series has two ports suitable for high purity gases or liquids and dry air or inert gases.
The CMFC-5000 Integrated and Compact Coriolis Flow Controller controls liquid and Slurry flows up to 5000 grams per minute.
Offering the same features as the GO™ Switch Model 11, Model 21 GO™ Switch provides a smaller design.
Allows for multiple switch points with one mounting hole resulting in space savings
The TS12T series Temperature Sensor utilizes a Platinum Wirewound RTD element that is hermetically sealed within a 300 series stainless steel housing with integral Military type receptacle or free wire leads
Parker's V Series Needle Valves are designed for positive, leak tight shut-off and regulation of fluids in process, power, and instrumentation applications.
Provide reliable venting of gases for set pressures from 1,500 psi (103 bar) to 20,000 psi (1378 bar).
2-piece ball valves provide superior performance and reliability in a wide range of applications.
DIR-ACT™ 2-piece ball valves provide a lower cost, compact, automated solution.
The CSM series is the companion to the CSP, covering higher pressure ranges from 30-120 psi to 2000-5000 psi.
The V8F series is impervious to harsh chemicals and designed for use in either all-attitude or vertical mount
Excela™ Electronic Switch creates new efficiency opportunities in industrial plants.
The Malema Sensors® Ultra-Low Flow SumoFlo® CPFM-8103 series Single-Use Coriolis Mass Flow Meters are specifically designed for measuring liquids in bio-pharmaceutical and other applications requiring all gamma-stable wetted surfaces.
The Low Pressure Switching (LPS) Monitor was engineered for monitoring low differential pressures in various process applications. The switching function allows for independent high and low pressure alarms to be adjusted from the front panel.
V12F series (liquid): In applications with maximum system flows well above the desired set point, these flow switches offer low pressure drop.
Parker’s F Series Filter valves are designed for protection of instrumentation systems from undesirable materials down to 1 micron and up to 6,000 PSI (414 BAR).
Parker Autoclave's low pressure tubing is capable of operating to 15,000 psi (1034 bar) and range in size from 1/16" to 1/2" tube size. Standard tubing is available in 316 and 304 stainless steel.
2-piece ball valves provide superior performance and reliability in a wide range of applications.
DIR-ACT 2-piece ball valves provide a lower cost, compact, automated solution.
The CSP series is a low-pressure switch ranging from 3-7 psi up to 25-150 psi, with high proof pressure of 350 psi.
E36W series high purity pressure switches for measuring pressure points referenced to absolute zero.
TTK's sensing cable FG-ECS detects conductive liquids at any point along its length.
The latest version of the Malema Sensors® SumoFlo® CPFM-8103-series Single-Use Coriolis Flow Meters with our improved Slimini3 electronics are specifically designed for measuring mass and volumetric flow rates of liquids in bio-pharmaceutical and other applications that require all gamma-sterilizable wetted surfaces. The fluid contacting surfaces are made of unreinforced polyether ether ketone (PEEK) that meet USP Class VI, USP 661, and USP 788 standards.
Staset® combines the safety of a tamper proof switch, the output of a transducer, and the convenience of a gauge in a reliable, cost effective 1 1/8” package.
Offer features developed to ensure reliable performance in higher flow wet process systems.
Parker’s C Series Check Valves are designed as a compact, inline check valve. These check valves provide uni-directional flow control of fluids and gases.
Available with piston type pneumatic actuators.
Concentric butterfly valves provide superior performance in a wide range of applications.
Sharpe® Valves V-ball, 3-piece, control ball valves provide superior performance and reliability in a wide range of applications.
Staset® combines the safety of a tamper proof switch, the output of a transducer and the convenience of a gauge in one package.
TTK’s sensing cable FG-ACS detects acid/chemicals at any point along its length.
The DMP-7000 pulsation dampener is designed for single-use applications in the life sciences industries.
The P-W series high purity gauge pressure switches offer accurate and repeatable switching for monitor/control and alarm/shut down protection.
The VF series flow switches contain only one moving part which results in an extremely reliable option for flow sensing applications.
Parker's R-Max II is a multi-functional component system capable of integrating both stream switching and filtering into one unique compact assembly. These systems can easily be expanded to handle multiple streams “side by side”.
Parker Autoclave Engineers offers a complete selection of accessories to complete your system requirements.
Sharpe® metal-seated, forged steel, piston check valves provide superior performance and reliability.
Pneumatic actuators for fast, efficient, and economical operation of ball, butterfly, and other rotary valves.
The PV36W series vacuum high purity pressure switch offers accurate and repeatable switching for monitor/control and alarm/shut down protection.
WIKA's liquid-filled model 213.53 Bourdon tube pressure gauge is constructed with a case from stainless steel and wetted parts from copper alloy.
Compact, cost-effective, high-performance pinch control valve designed for use with Single-Use flexible tubing systems.
The P48W high purity gauge pressure switches offer accurate and repeatable switching for monitor/control and alarm/shut down protection.
Sensitive silicone on silk diaphragm senses air or inert gas pressure in fractions of an inch of water.
Developed specifically for analytical, lab and other instrumentation flow control systems.
Parker Bestobell's cryogenic globe valves feature an innovative loose flange bolted bonnet design that allows for thermal expansion and contraction, therefore eliminating leakage at the bonnet gasket.
Sharpe® metal-seated, forged steel, swing check valves provide superior performance and reliability.
Generates the same output torque as a conventional rack & pinion actuator in a much smaller design.
WIKA's DIH series field indicators are 4 ... 20 mA current loop indicators that offer a superimposed HART® communication between the connected transmitter and the control room.
WIKA's 233.53 and 232.53 Bourdon Tube Pressure Gauges are suitable for corrosive environments and gaseous or liquid media.
The Malema Sensors® SumoFlo® CPFM-8100-series Single-Use Coriolis Mass Flow Meters are specifically designed for measuring liquids in bio-pharmaceutical and other applications that require all gamma-sterilizable wetted surfaces.
The P36W high purity gauge pressure switches offer accurate and repeatable switching for monitor/control and alarm/shut down protection.
TopWorx™ 52M is a low profile, proximity sensor with a 316L sensing face in a standard 12mm package.
The IR4000 is a versatile regulator that works well with both high and low pressure applications.
Prevents the backflow of the media in the storage, transportation and production of liquified gases.
2-piece ball valves provide superior performance and reliability in a wide range of applications.
Sharpe® Valves economy, uni-body CWP ball valves provide a lower cost solution in many applications.
ASCO™ Valve Dust Collector Series are high-flow fast-opening 2-way valves.
WIKA's industrial stainless steel bourdon tube pressure gauges were built for adverse service conditions where pulsating or vibration exists.
WIKA's 232.54 and 233.54 Bourdon Tube Pressure Gauges are made of Industrial Stainless Steel.
The GO™ Switch Models 73 and 74 are the world’s most commonly used and widely trusted leverless limit switches.
Offers accurate and repeatable switching for monitor/control and alarm/shut down protection.
Fulfils the constantly growing requirements for process monitoring on plants for sanitary applications.
Provides two stages of pressure reducing regulation for optimum outlet pressure control
Parker Bestobell’s cryogenic gate valves feature an innovative flexible wedge design with minimal leakage.
Sharpe® electric actuators provide superior performance in a wide range of applications.
Sharpe® Valves polymer-seated, uni-body CWP ball valves provide a lower cost solution in many applications.
ASCO™ Spool Valves Pilot Operated, Explosion-Proof, Low Power Solenoid Valves
Built for applications with high dynamic pressure pulsations or vibration
WIKA's 233.55 Bourdon Tube Pressure Gauges are all Stainless Steel Construction.
The Model 7F has a 2.062" probe and all the features and benefits of the Stroke to GO™ cylinder position sensor product line.
Designed for high purity wet process installations where 316L stainless steel is not acceptable.
The Sensorex TCSP feature a wide measurement range and dependable toroidal technology
Parker’s FS190 Series excess flow shutoff valve operates within a wide range of inlet pressures
ExactSteam V-Cone System, complete flowmeter for steam metering
Economy, polymer-seated, 2-piece CWP ball valves provide a lower cost solution.
Sharpe® Valves flanged ball valves provide superior performance and reliability in a wide range of applications.
ASCO™ Series 8551/8553 valves are 3-way or 4-way, 5 ported 2 position piloted spool type single or dual solenoid valves.
WIKA temperature transmitters offer high accuracy, galvanic isolation and excellent protection against electromagnetic influences
Parker's B Series ball valves offer superior performance in a variety of pressure and temperature applications in process, and instrumentation.
Has a 2.062" probe and all the features and benefits of the Stroke to GO™ cylinder position sensor.
The P15M-A series pressure switch is designed for high purity wet process installations where 316L stainless steel is not acceptable. Materials of construction include Engineered Plastics such as PFA, PTFE, PFA and Peek.
Multipoint thermocouples are often used for measuring temperature profiles in reactors or fuel depots or for the detection of the so-called “hotspots”.
Parker's MPI™ Series is an inverted two ferrule design engineered and manufactured to provide secure, tight, and leak resistant connections for small bore instrumentation applications up to 15,000 PSI.
The Ultra Mag flow meter sets a new standard for performance, ease-of-use, and value.
Sharpe® Valves metal-seated, stainless steel, swing check valves provide superior performance and reliability.
Sharpe® Valves ductile iron, ball valves provide superior performance and reliability in the oil patch.
You were tireless in your support and it will not be forgotten!
