Power controls, temperature controls, thermostats and PLC’s equipped with multiple I/O and communications.
HotRod Cartridge Heaters are designed and manufactured to routinely outperform other cartridge heaters in difficult applications.
Screw plug immersion heaters feature both WATROD round and FIREBAR flat tubular hairpin bent elements and are ideal for direct immersion heating of liquids and oils
The VTS-100-S panel offers a single PID controller with a built-in over-temperature input to protect the heater.
TTK's FG-OD hydrocarbon sensing cable is a digital sensing cable for detection of liquid hydrocarbons and liquid insoluble in water present on the cable.
HEATPAK® is a partial enclosure system that provides freeze protection.
FLD-x48 enclosure contains one or two self-powered intrinsically safe monitoring modules for sensors detecting leaks of refined products or crude oils in extreme environmental conditions.
Temperature Sensors for Industrial and Commercial applications assure precise and accurate temperature control of critical processes.
Non-swaged cartridge heaters offer a cost effective solution that can be used at watt densities up to 45W per square inch and temperatures up to 1000°F.
Duct heaters can be installed with little effort and are easily adapted to many non-pressurized air-heating systems, while the modular duct heater offers increased reliability.
Valin Thermal Solutions offers VTS-110 bench top temperature control console with its rigid aluminum construction and PID temperature controllers.
TTK's FG-ODP is a point sensor for liquid hydrocarbon and non-conductive solvent leak detection.
HEATPAK II provides a reliable instrumentation protection package.
Square swaged cartridge heaters are used in high temperature and high watt density applications; and are much easier to remove after usage
Raymax® Radiant Panel Heaters easy to install, capable of high surface temperatures and ideal for applications requiring “hot-face” temperatures above 1000°F (540°C)
Heat Trace Panel, able to switch up to (4) 30 amp heat trace circuits independently controlled.
Watlow’s PM PLUS™, the enhanced EZ-ZONE® PM, is now more intuitive with SMOOTH-TOUCH™ keypad.
T-Series enclosure heaters are designed with redundant internal protection for trouble free operation.
Electric tubular heating elements perform exceptional heat transfer by conduction, convection or radiation to heat liquids, air, gases and surfaces.
Multicell Heaters offer extreme process temperature capability, control for precise temperature and loose fit design for easy removal.
Single- and double-ended tubular heaters have a variety of mounting and termination options that make them ideal for industrial immersion and air applications and are available in 240V or 480V.
Heat Trace Panel, able to switch up to (4) 30 amp heat trace circuits independently controlled.
TTK’s FG-SYS unit ensures immediate detection/location of water and acid leaks.
O'Brien SADDLEPAK® is a modular support system for field-mounted instrumentation.
Flexible Heaters and Thermal Insulation Products are flexible in design and application to fit your specific needs.
Blower Heaters can be used for primary, supplementary, spot, or dual-system heating, perfect for open spaces.
Standard SCR Panel VTS-100-S, Control Consoles VTS-110, Heat Trace Panel (HTP-L-()C), Heat Trace Panel (HTP-A-4C)
TTK’s FG-ALS8 leak detection alarm and locating unit has eight detection zones.
J-LINE® is used in applications where additional protection is required.
FRP and FRS Series Infrared Comfort Heaters are perfect for total or spot heating in industrial and commercial areas.
The EZ-ZONE PM temperature integrated panel mount controller offers control options that reduce system complexity and thermal loop ownership cost.
Eight Zones Alarm & Locating System Unit for Hydrocarbon Leak Detection
From electric Zig Zag heat cables to Valin's elegant SnoFree™ Heated Roof Panels, we have safe, effective solutions
Flexible Blanket and Drum Heaters solve a wide range of temperature problems in industries such as oil and gas, and construction
The EZ-ZONE PM temperature integrated panel mount controller offers control options that reduce system complexity and thermal loop ownership cost.
Nelson™ Heat Trace LT Series self-regulating heater cable is ideal for use in maintaining fluid flow under low ambient conditions.
The FLD-HSC is a high-performance passive hydrocarbon detector designed specifically for detecting the unwanted presence of a wide range of liquid hydrocarbons. This multiplexed sensor cable provides quick reaction to light and heavy hydrocarbons and can be used in outdoor environment.
Valin carries electric heat trace cables that are suitable for process maintenance, pipe and vessel freeze protection
Series KK hazardous area high-temp heating cable is ideal heating long run applications that require high temperature extreme flexibility up to 500°F.
RTDs ensure precise and repeatable temperature measurement and are specially designed to ensure precise and repeatable temperature measurement.
Nelson™ Heat Trace HLT Series self-regulating heater cable is ideal for maintaining flow over a wide range of operating temperatures.
The FLD-DHSC is a high-performance passive hydrocarbon/solvents detector designed specifically for detecting the unwanted presence of a wide range of liquid hydrocarbons or organic solvents.
Heater/pump skids are able to maintain a constant temperature throughout the storage tank, preventing freezing, fallout, or stratification.
AWD Duo-Tapes® and AWH Mono-Tapes® are specifically designed for industrial and work well for those applications that require a helping hand.
Valin provides a tremendous selection of general application, mineral insulated metal sheathed, base metal, high temperature, surface temperature and multipoint thermocouples.
Nelson™ XLT Series self-regulating heat trace cable is ideal for maintaining flow over a wide range of operating temperatures.
O'Brien TRACEPAK tubing bundle consists of a small diameter tube or group of tubes packaged in an insulated, weatherproofed jacket.
FLD-O2W-SP is a fully encapsulated high-performance sensing probe designed for detecting leaks of refined products or crude oil floating on water surface in extreme environmental conditions.
Watlow's F4T Process Controller Provides The Flexibility of a Modular I/O Controller with Best-in-Class Ease of Use.
Silicone laminate heaters improve heat transfer, speed warm ups and decrease wattage requirements. They are rugged, yet thin, lightweight and flexible.
Series 2000 heat trace cables provide freeze protection and process temperature maintenance for fluid transport and storage systems requiring very high levels of heat output or exposure to elevated temperatures.
Valin’s AccuTrace™ control panel incorporates the latest technology and is packed with features designed to help optimize your heat trace system.
As a general rule of thumb electric tracing is more easily temperature controlled.
The FLD-PHD is a high-performance passive hydrocarbon detector designed specifically for installation outdoor in challenging environments. This sensor cable is used to detect the unwanted presence of non-conductive hydrocarbon fluids.
For design engineers who are dissatisfied with clunky, component level power switches, Watlow’s ASPYRE® is an intelligent line of power controllers that deliver breakthrough thermal performance. Unlike basic on/off switches, ASPYRE provides integrated technology making system performance accessible in an easy-to-use, robust design giving you extended asset life and a competitive edge.
Cast-X heaters are designed to heat liquids or gases and feature stainless-steel Flowpath tubes in non-welded construction with UL approved elements.
The 2300 series of self-regulating heating cables can maintain temperatures up to 250°F and withstand 150 psig saturated steam purging and intermittent temperatures to 366°F (185°C)
HELIMAX™ electric heat exchanger helps reduce the coking and fouling typically associated with standard heat exchangers.
If steam is available it can provide an effective choice for winterizing instrument impulse lines.
FLD-TSP7 is a high-performance 7-inch touchscreen controller designed for powering and interfacing with Naftosense brand of monitoring modules.
Insulated Ceramic Band Heaters offer a flexible heating system that yields efficient transmission of heat.
The OPTIMAX heat exchanger combines optimal dynamics, efficient heat transfer, and a compact and reliable package to create a world-class system solution.
The 2700 series of self-regulating heating cables supply heat in direct response to local temperature variations and can maintain temperatures up to 150°F (65°C), surviving intermittent exposure up to 185°F (85°C) with power applied.
O’Brien’s STACKPAK® is a sample transport bundle system used for stack gas, environmental and process monitoring.
FLD-SMP-MB is a high-performance controlling module designed for mounting in your existing or new enclosure. It was specially designed to interface with Naftosense ERBUS proprietary communications and low voltage power to related monitoring modules.
Keep tank contents at their appropriate temperature with by partnering with Valin for your tank heating needs.
Mineral Insulated band heaters provide efficient heat transfer and increased heater life.
The HTS-6 heater cable is designed for use in indoor and outdoor locations and residential and commercial freeze protection on water pipes and drain pipes
Explosion-proof unit heaters are designed to heat areas classified as hazardous locations
The FG-NET digital unit is designed to be used for water leak detection, bases leak detection, acid leak detection and fuel leak detection.
TrueTube® provides best-of-breed performance in sample transport for process and emissions analyzers.
FLD-SSM-H is a high-performance all in one monitoring module and controller built into one budget conscious package. Designed for detecting leaks of refined products or crude oil in extreme environmental conditions.
Inline heaters are designed to heat either a liquid or a gas while the process is moving and because they are electrically powered, they are quiet, nearly 100% efficient, and have an incredible turndown ratio.
MICA band heaters are designed for optimal performance in applications up to 1000°F
MI mineral insulated heating cables provide rugged and reliable heat tracing for a variety of demanding applications with temperatures up to 400°F and special order cable to 1100°F
SCG Series convector heaters are designed to heat areas classified as hazardous locations
TTK's FG-EC water sensing Cable detects and pin-point locates water leak & base liquid leak at any point along the cable.
O’Brien Analytical TrueTube® EP is electropolished select grade 316L SS tubing.
FLD-FBS is an intrinsically safe high-performance monitoring module designed for detecting leaks of refined products or crude oils in extreme environmental conditions. The device is engineered for outdoor installation in challenging environmental conditions.
Personnel heating units, freeze protection units, HVAC duct heaters, and infrared radiant heaters. All electrically powered and tightly controlled.
Watt-Flex cartridge heaters use a unique split-sheath design for expansion when energized
Flange immersion heaters are easy to install and maintain. Designed for heating liquids and gases in tanks and pressure vessels, they are ideal for applications requiring higher kilowatts.
Use these guidelines to ensure you choose the right cable for your application
TTK's FG-AC sense cable detects and pin-point locates acid leak at any point along the cable.
TrueTube® Electropolished SilcoNert Tubing provides chromium enriched electropolished 316L stainless steel tubing in continuous coils.
FLD-MXM is an intrinsically safe high-performance multiplexed monitoring module designed long line applications. FLD-MXM was built monitoring large arrays of leak detecting cables for rapid response to refined products, crude oils, or organic solvents.
Forced electric air heaters, radiant heaters, and convection heaters for maximum comfort with minimum use of energy.
The FIREROD cartridge heater provides superior heat transfer, resistance to oxidation and corrosion and long life even at high temperatures.
Over-the-side heaters are versatile and ideal for heating water, oils, solvents, salts and acids, with the heated portion immersed along the side or at the bottom
Valin's VTS-100-C Contactor Panel offers a single PID controller with a built-in over-temperature input to protect the heater.
TTK's FG-NET-LL is designed and developed for the Oil & Gas industry on long distance applications.
S-LINE® insulated tubing is designed specifically for liquid and gas transport lines.
FLD-xRTD is a self-powered intrinsically safe Monitoring module designed for rapid response to detecting leaks of refined products or crude oils in extreme environmental conditions. The monitoring module is engineered for outdoor installation in challenging environmental conditions.
You were tireless in your support and it will not be forgotten!