A wide variety of mechanical components to help build, support and move whatever you need.
Valin offers a complete line of Mobile Robots, Articulated Robots, Parallel Robots, Cartesian Robots, SCARA Robots and Table Top Robots.
Indicating lights and sound alarms enhance the safety and efficiency of workplaces. HMI systems give operators complete centralized control
NEMA gearheads feature a high-efficiency spur gear design, in a light, compact package, and are ideal for applications requiring smooth operation and low starting torque. Ratios from 3:1 to 100:1 are available.
The AVENTICS™ Series CCL-IC cylinders with their compact and clean design can be used in a wide range of applications.
The ASCO™ Series 096 direct acting miniature solenoid valves are customizable and suitable for a wide range of OEM applications.
The ASCO™ Series 038 miniature solenoid valves offer isolated fluid control.
The ASCO™ Series 045 is a line of 2-way and 3-way normally closed and normally open solenoid-operated pinch valves.
The AVENTICS™ Series 651, 652, 653 is an easy-to-install line of pneumatic filters, regulators, and lubricators (FRLs).
Valin enclosure, panel, and integrated assembly solutions greatly simplify the challenge of designing and engineering your fluid automation system.
The AVENTICS Series TC15 valve system is the perfect choice for applications calling for lightweight valves with high flow rate in a small space.
The AVENTICS Series 563/565/567 have an aluminium housing, and are suited for assembly on single or manifold subbases and offer flow rate performances of up to 13620 l/min with a working pressure of up to 30 bar.
AVENTICS™ hydraulic cylinders are designed for operation with clean, petroleum-based hydraulic fluid.
The AVENTICS™ Series CKP cylinders provide sturdy, ultra-precise guiding with excellent repeatability.
The AVENTICS™ Series RAK is an efficient and easy way to generate torque from compressed air.
The AVENTICS™ Series LU1 is a holding unit using eccentric movement to hold the piston rod in any position.
The AVENTICS™ Series PowerMaster® NFPA cylinders are heavy duty pneumatic and hydraulic NFPA steel cylinders.
A pulse press is an actuator combining a stepper motor and load cell, that is capable of performing power control.
With the new PGL-plus-P, SCHUNK is introducing a flexible and robust powerhouse that shines above all else for its increased safety. The pneumatic gripper is the first in the world to have GripGuard certified safe gripping force maintenance.
Compact, high-rigidity electric linear slides with simple, dust-resistant structure providing the high response, low vibration and hunting-free operation of a stepper motor in an electric linear slide.
If ACE gas push type springs cannot be used due to a lack of space, ACE's industrial gas pull type springs come into their own. These compact assistants with body diameters of 0.59“ to 1.57“ (15 to 40 mm) are effective in the direction of traction and work in the opposite way to the principle of gas push type springs.
Designed with large thru bores, Vaccon fittings connect to vacuum cups, vacuum generators and spring levelers ensuring unrestricted vacuum flow for safe material handling operations. For plumbing flexibility, Vaccon offers 9 different fitting groups with various thread sizes.
The Series GB planetary gearboxes, by means of a planetary gear system, enable the reduction of the angular speed and the increase of transmittable torque.
The PM-DD servo motor is designed to provide high torque and high accuracy.
High Density Slotted Wall Wiring Duct, 1.5" x 2", Non-Adhesive, PVC, White, 120ft/Carton
Provide safe, quick access to essential equipment without disrupting the flow of your operation.
Dorner AquaPruf VBT sanitary vertical belt conveyors are for elevating bulk products.
Portable IIoT unit used to analyze and visualize data from pneumatic installations and systems.
Integrated and powerful control for demanding applications.
Offers an isolated Ethernet network interface for up to eight differential current input channels.
The FX5UJ is equipped with various built-in functions to improve ease of use.
Provide the reliable power needed for industrial equipment and instrumentation devices when AC power is not convenient or accessible.
Advanced motion control products for the semiconductor, defense, automotive, aerospace, biomedical, and packaging industries.
Stealth® Gearmotors represent the first time a brushless servo motor and a helical planetary gearhead have been integrated into a single product.
The ICS D2 versions are suitable for food processing with 304 grade Stainless Steel.
The ASCO™ Series 188 solenoid valves are designed to control air and inert gases.
Flapper proportional valves are designed to proportionally control the flow of neutral and aggressive liquids and gases.
ASCO™ Series S170-S370 pinch valves can control any fluids that is compatible with the tubing material.
AVENTICS™ Series QR2, push-in connectors with easy, secure mounting are available in many versions.
The AVENTICS™ Series SWN is a cartridge cylinder and thus can be implemented into a tight space.
The AVENTICS Series CD consists of various spool valves with an extremely durable die-cast zinc housing.
The AVENTICS Series 563 018/131 are manually operated poppet valves with a flow rate of 300 l/min (Series 563 018) and 1100 l/min (Series 563 131). With their simple and robust design they are always ready for applications and easy to operate even with work gloves.
The AVENTICS™ Series A is a rugged aluminum NFPA interchangeable pneumatic cylinder.
The Numatics Series CGT is a compact guide slide that is ideal when high load and force are required.
The Numatics Series SC swing clamps combine linear and rotary motions.
The AVENTICS™ Series LU6 is a mechanical locking unit/brake for piston rods in pneumatic cylinders.
The AVENTICS™ Series TaskMaster™ has been enhanced with ideal cushioning.
PowerGate ‘H’ Series HVAC Controllers offer the simplicity and functionality of an HVAC bypass controller and the high specification, performance and reliability of the Mitsubishi Electric FR-F800 VFD.
The NACQ Series Compact Cylinder by Airtac is the perfect drop-in replacement for compact cylinders.
The AlphaStep EAC Series electric linear actuators are quick and responsive and incorporate a ball screw design, offering high performance from low speed to high speed or with light loads or heavy loads, regardless of demanding operating conditions.
The ACE hydraulic dampers are similar in appearance to our industrial gas springs but are adjusted in the end position and work differently to the DVC family with individual speed adjusters for the push and pull direction. This provides users with the maximum flexibility.
Poly-vinyl Chloride (PVC) is possibly the most versatile product from the chemical industry. It's used extensively in construction from siding, to wire insulation, to window frames to pipe. With the addition of a plasticizer, the compound becomes quite flexible and an excellent material for clear tubing.
The motion transmission devices are necessary for a proper connection of electromechanical axes and cylinders with motors or gearboxes.
The mPR series stage is designed to meet the needs of those seeking very high precision in a compact direct drive product.
High Density Slotted Wall Wiring Duct, 1.5" x 3", Non-Adhesive, PVC
Capable of multiple curves as well as inclines and declines on a single conveyor.
The iQ-F Series is Mitsubishi Electric’s compact control platform with expanded built-in functions.
Perfect for high volume, controlled environment applications where essential features are the only requirement.
Sensors detect, measure, analyze, and process various changes that occur on productions sites, such as changes in position, length, height, displacement, and appearance.
The perfect solution for obsolete SVD (Slit Valve Door) pneumatic EV manifolds 0010-20052 & 0010-70297 on your aging fleet of Endura process tools.
The CSL-RD (ISO 6432) has a smooth profile and low surface roughness made of stainless steel.
The ASCO™ Series 411 line of miniature solenoid valves deliver up to twice as many cycles of reliable, repeatable performance.
The ASCO™ Series 202 Preciflow solenoid valves are designed to precisely control the flow rates in medical equipment and analytical instrumentation.
The ASCO™ Series 284 of solenoid pinch valves are designed for use with highly aggressive or high-purity.
AVENTICS™ Series TU1 offers a broad range of plastic materials and colors to fit with your tubing application.
The AVENTICS Series L01 is a line of direct solenoid actuated pneumatic valves designed for high cycle-rate machine applications.
The AVENTICS Series 740/840 feature directional valves with soft, abrasion-free diaphragm technology.
The AVENTICS Series 490/579/589 have a robust polymer housing that can be mounted individually or as a block. They cover a large range of voltages and feature fast connections for pneumatic tubing.
The AVENTICS Series CD01-PA is the flexible valve system according to ISO 15407-1. The Series offers pneumatic or electrical control, vacuum or pressure of up to 16 bar, dual-pressure application, pressure-zones, ATEX certification, and various accessories allow for a wide range of modularity.
The Numatics Series PST precision slide tables provide smooth linear motion with high accuracy.
The Numatics Series LR is a rotary actuator that incorporates a low-profile rack and pinion design.
The AVENTICS™ Series SA1 industrial shock absorbers decelerate reliably moving masses.
The AVENTICS™ Series MCR is a line of magnetically coupled rodless pneumatic cylinders.
High-torque, 2-phase bipolar stepper motors and geared type stepper motors offer the optimum performance and value.
The AVENTICS Series SPRA electric rod-style actuators are the ideal solution to perform fast and powerful linear movements. They are very flexible, precise and energy efficient, improving sustainability and Total Cost of Ownership (TCO).
The DGII Series is a line of of products that combine a high rigidity hollow rotary table with an AlphaStep absolute encoder AZ series closed loop stepper motor and driver package.
ACE Hydraulic feed controls are recommended as the perfect solution when sawing, cutting, drilling and in order to prevent the stick-slip effect on pneumatic cylinders.
Single tube PU coil tubing provides the extreme flexibility that is necessary for completing a wide range of projects. Its excellent kink resistance and outstanding memory make it the ideal choice for projects that require repeat bending and twisting of the tubing. In addition, the ether-based nature of the polyurethane material allows the spiral tubing to last longer than basic standard plastic tubing products.
Mencom is the leading manufacturer of circular connectors and our rugged solutions are engineered for reliable performance under the most extreme use in harsh environments.
Lets you add expansion I/O modules for a high-density, cost-efficient remote I/O solution
High Density Slotted Wall Wiring Duct, 2" x 3", Non-Adhesive
With a profile less than 1/2" square, it delivers precision even in thight spots.
Rollon’s telescopic slides can support 5000 lbs. extended out 5 feet.
Mitsubishi Electric’s most advanced and capable VFD solution.
Designed for applications where cost or heat issues make mounting the transformer outside the control panel necessary.
The S Series is a stainless steel NFPA Interchangeable pneumatic cylinder line.
ASCO™ Series L256 general purpose valves are designed to control water, air, inert gases, steam and non-aggressive fluids.
The ASCO™ Series 202 Preciflow solenoid valves are designed to precisely control the flow rates in medical equipment and analytical instrumentation.
The ASCO™ Series 384 is an aluminum body, solenoid-operated pinch valve designed for use with highly aggressive or high-purity liquids.
AVENTICS™ Series TU2 Duo plastic tubing in PUR are suitable for dynamic laying and can be partially or continuously bonded.
The AVENTICS Series L1 air valves offer speed and high flow capacity in a compact design.
The AVENTICS Series 740/840 feature directional valves with soft, abrasion-free diaphragm technology.
The AVENTICS Series AV03/AV05 provide a reliable basis for both compact handling systems and complex automation solutions. Within machine safety the Series AV03/AV05 offers intelligent solutions that significantly reduce your effort in creating a safe design.
The AVENTICS™ Series PRA (ISO 15552) cylinders have a compact design profile with integrated sensor slots.
The Numatics Series SPS small power slides are ideal for pneumatic applications with tight spaces.
The Numatics Series R is a line of heavy-duty, rack and pinion-style rotary actuators.
The AVENTICS™ Series SA2 industrial shock absorbers were created for AVENTICS™ actuators.
Single-use technologies enable biopharmaceutical companies to achieve a faster time-to-market and reduction in operational costs.
Notifies network information immediately by light, sound, and voice. Convert text data to voice message with the Text to Speech function.
The HLQ Series Slide Table Cylinder (Ball Bearing Type) by AirTAC.
The DR/DRS2 Series compact linear cylinder uses the AlphaStep AZ Series stepper motor and driver. The actuator is equipped with the Mechanical Absolute Encoder Stepper Motor.
ACE rotary dampers provide an invisible yet valuable service as a maintenance-free machine element to allow controlled deceleration of rotary or linear movements.
Poly tubing, often referred to as PE tubing or polyethylene tubing is a flexible, lightweight, durable and corrosion resistant plastic that can be used for a wide range of liquid, gas and fluid transfer applications. Poly tubing is also FDA approved for use in food and beverage applications. Polyethylene tube is completely safe and is one of the most common PE tubing materials in the world.
Mencom offers a wide range of reliable Industrial Networking Solutions for the industry 4.0 Smart Factory applications. Choose from a wide selection including managed, unmanaged, industrial grade, ultra-compact, DIN-rail mount, multi-ports, Power over Ethernet (PoE), gigabit options, and more.
The 1100 Series conveyor platform is the industry’s smallest conveyor.
The Dorner 3200 Belted Conveyors are heavy duty low maintenance fabric belt conveyors.
Versatile 2-finger gripper for small components for maximum workpiece variety
Inline splicing connector with lever for all conductor types.
Offers a cost-effective, modular solution for Ethernet remote I/O systems.
The MR-JET series servo system performs basic functions at a high level and helps increase the productivity of your machines.
Epoxy encapsulated to protect cores and coils against moisture, dirt and industrial contaminants.
Networking is the glue that holds many control systems together. It is the road over which we can best take advantage of the capabilities of modern-day control systems. Today, we can get any information you want from wherever it is to wherever you want it. We use a variety of technologies to develop these solutions.
Valin's drop-in pneumatic manifold replacement is a perfect solution for your obsolete gas box pneumatic manifolds on your aging fleet of Centura and Centura Ultima process tools.
The AF2 series flow rate sensor monitors air consumption in pneumatic systems, enabling fast action in case leaks are detected.
In today's highly automated machines, the AVENTICS Series G3 electronic fieldbus valve system is replacing conventional hardwired solutions.
The ASCO™ Series 202 Preciflow IPC solenoid valves are designed to proportionally control the flow of air and inert gases.
The ASCO™ Numatics disposable in-line filters include the PL Series polyurethane straight and nylon dual-barbed styles, plus the PT Series nylon straight style.
AVENTICS™ Series QR1 push-in connectors with easy, secure mounting are available in many versions.
The AVENTICS Series L2 valve line offers speed and high flow capacity in a compact design. Its slim, 1-inch body width is ideal for in-line mounting.
The AVENTICS Series AP offers a wide range of poppet valves with aluminium housing.
The AVENTICS™ Series 608/609 SentronicD is a 3-way, direct-operated proportional valve with digital control for air or neutral gas.
The AVENTICS™ Series TRB (ISO 15552) cylinders are among the most frequently implemented in industries where heavy duty cylinders are required.
The ASCO™ Series 445 is a family of rodless pneumatic cylinders with magnetic coupling.
The Numatics Series AR is a low-profile, compact rotary actuator for pneumatic control systems.
The AVENTICS™ Series 370 industrial shock absorbers decelerate reliably moving masses.
The C Series is a robust compact cylinder line designed to fit tight space requirements.
The Accuriss 28, as the name implies, is 28mm square. The product is available in three stack lengths, with holding torques ranging from 8.3 to 16.7 oz. in.
Support arm systems CP40/60/120/180 are for use in the static load range from 400 to 1800 N. Endless combination options with a wide variety of functions. Reliable cable protection for all applications. The support arm configurator is the perfect planning tool for fast, secure design of the support arm to your application.
The HLS Series Slide Table Cylinder (Cross Roller Bearing) by AirTAC.
The Rack and Pinion System L Series- AZ Series Equipped is a linear actuator in which a rack and pinion mechanism with a motor have been combined.
Miniature shock absorbers from ACE are tried-and-tested quality products used in millions of industrial designs throughout the world. They optimize machines in an equally reliable and effective way by decelerating loads quickly and without recoil.
Available in a wide variety of shapes and configurations, Camozzi pneumatic fittings are made of brass, technopolymer, and stainless steel for ease of installation on a variety of devices, machines, and tubing where sealed reliability matters.
Mencom’s expandable T35 series of Din Rail modules allow you the convenience of mounting a wide variety of connectors to your DIN rail. Also known as “break-out boards” these modules allow the end user to take a pre-molded connection, like a ribbon cable or D-Sub, and easily break it out to individual terminal points.
Can be combined with over 500 I/O modules of the 750 series to address all your control needs.
Dorner 3200 Modular Belt Conveyors have a sleek design, heavy load and high speed capabilities.
FR-F800 is a pump and fan control VFD optimized for maximum energy saving.
Offers a cost-effective, modular solution for Ethernet remote I/O systems.
MR-J4 amplifiers provide high speed, high accuracy solutions, and one-touch tuning in single and multi-axis formats.
Certified internationally, for harsh industrial environments and hazardous locations.
Advanced motion control products for the semiconductor, defense, automotive, aerospace, biomedical, and packaging industries.
Pneumatic actuators provide cost-effective and simple motion control. Valin works with a wide variety of types, load ratings and standards including…
The Microstage 28 product line was designed with performance and price in mind.
The AVENTICS Series 580 fieldbus communications node supports up to 128 AVENTICS 500 Series solenoid valves per valve system in a compact package.
The ASCO™ Series 614 SentronicPLUS is a 3-way digitally operated pressure regulator valve.
SiteManager is the advanced IoT edge gateway component that enables industrial remote access and machine data collection with edge computing functions in a single unit.
The Numatics Series Mark 3 is a line of high-flow miniature directional control valves.
The AVENTICS Series ST offers a comprehensive range of spool valves with hardened stainless steel housing.
The AVENTICS™ Series 615 Servotronic Digital is a highly dynamic 3-way proportional valve with digital control.
The AVENTICS™ Series ITS (ISO 15552) cylinders are often chosen when extremely large loads need to be moved.
The Numatics Series RM rotary module uniquely transfers air pressure through fixed ports to rotating parts on its rotary platform.
The Numatics Series RW 90-degree rotary actuators are designed with two independent piston cylinders.
The AVENTICS™ Easy-2-Combine mounting interface with interlocking connections combine the mini slide, rodless cylinders and rotary modules into multi-axis systems.
Heat and shock resistance make this sensor perfect for demanding applications.
The Accuriss 42, as the name implies, is 42mm square. The product is available in four stack lengths, with holding torques ranging from 45 to 106 oz. in. The Accuriss 42 mounting is the standard NEMA 17 mount.
The NPB Series Mini Cylinder by AirTAC has a compact structrure, small volume and is light weight.
The VRL series is the all-rounder in the planetary gearbox marketplace. With helical gearing, robust internal construction, smooth operation and high torque density, this product is truly best-in-class.
ACE industrial shock absorbers work hard. Their application means moving loads are evenly decelerated over the full stroke. The result: the lowest braking force and shortest braking time.
Control elements represent the core of a pneumatic circuit in which precision and reliability can make the difference. With a vairety of sizes and flow rates, Camozzi valves and solenoid valves are availble to respond to the needs of any industrial sector - designed for maximum performance of flow rate and power consumption.
Mencom Corporation is now offering ILME Rectangular Connectors known for their high-quality construction and reliable connection in the industry. These rectangular connectors include the base, the mating hood and the male and female insert. Applications for these connectors are found in process automation, automotive, robotics, factory automation, and machine tools just to name a few. This solution will help drastically reduce labor time and costs associated with product installation.
The Dorner 2200 Series Belted Conveyors have a low profile design for precise handling of products and small spaces.
Flexible conveyors with pallets for product routing and control.
Brings together advances in quality in one multi-purpose inverter.
Ideal for device connections in the field, no matter the performance class.
The MR-JE is a flexible and reliable servo solution to make startup and adjustment simple.
These units range from 750 to 2,000 VA with +80°C temperature rise.
Switches, electrical and industrial components for Motion Control & Automation project needs
Valin offers comprehensive Vacuum technology solutions for the Automation Industry through various individual components that are needed to set up your vacuum systems.
The Microstage 42 product line was designed with performance and price in mind.
The AVENTICS Series AES fieldbus connection can be integrated into all AVENTICS fieldbus-compatible valve systems or can also be configured as a stand-alone solution.
The ASCO™ Series 630 Piezotronic valves with proportional control are designed for analytical and diagnostic equipment applications.
Parker's OSPE SB ball screw driven rodless actuator is a cost effective solution designed for light to medium industrial applications.
Secomea's DCC combines data collection and remote access in a single device.
The Numatics Series Mark 8 is a line of pneumatic directional control valves designed for repeatable and reliable use in harsh or challenging environments.
The AVENTICS™ Series ICM is a mini cylinder and cost-efficient solution for high corrosion resistance and reliability.
The AVENTICS™ Series 616 SentronicHD is a highly accurate 3-way valve with digital control.
The Numatics® F Series is a Non-Rotating NFPA Interchangeable pneumatic cylinder line that provides the solution to specific applications
where piston rotation is not acceptable.
The Numatics Series PBS power block slides are designed for pneumatic applications where space is at a minimum.
The AVENTICS™ Series BCP cylinders are bellow actuators with firmly flanged steel covers and bellows made of natural rubber in the standard version.
The AVENTICS™ Series ST6 sensors are suitable for mounting in the 6 mm T-slot as well as sensor mounting to the cylinder.
The ASCO Numatics Series 280 digital sensors can be used as digital pressure-vacuum gauges for accurate visual display.
The Accuriss 57, as the name implies, is 57mm square. The product is available in three stack lengths, with holding torques ranging from 75 to 260 oz. in.
The ERH series is a compact, robust cycloidal reducer designed for servo applications. This product features high reduction ratios in a compact form factor.
The heavy industrial shock absorbers from ACE top off the company's offerings in damping technology. This ACE category gives Designers a choice between self-compensating and adjustable machine elements.
Pneumatic actuation consists of different product families, both for applications that require linear movements, and for those that require rotary movements. According to the type, Camozzi can offer ISO or non-standardised actuators. All actuators have a modern design and are developed to save space and weight.
The ability to interface with the contents of the cabinet without opening the door prevents a lot of potential safety hazards associated with having an open electrical panel, such as Arc Flash.
Wiring Duct Cover for 1" Duct, 6 ft Long, PVC, White, 120 ft/carton
Dorner 3200 Precision Move conveyors are ideal for precision part movement.
Provides an economic painted steel frame paired with Dorner’s commitment to precision conveyance.
Perfect where space is limited or use of a standard DIN rail isn’t possible.
Long strokes ideal for lifting applications.
FX5S is the ideal controller for simple machines to achieve the greatest cost efficiency for I/O control.
Interleaved copper windings reduce I²R losses and maximize efficiency.
Valin works with several world-class manufacturers who provide a number of quality, cost-effective and unique solutions. They cover a wide range of types and form-factors of gearheads
SMART Hydraulic Actuators fuse the power of hydraulics with the precision of servo control.
The Twintrac product line was designed with performance and price in mind. The base of the Twintrac is a precision machined extrusion.
The ASCO™ Series 226 fluidic control valves are designed to handle both liquid and gases in analytical and medical device instruments.
The ASCO™ Series 908 electronic control unit converts analog input control signals to the coil current of a proportional solenoid valve by means of pulse-width modulation.
Parker's OSPE ST trapezoidal (lead) screw driven rodless actuator is a cost effective solution designed for light to medium industrial applications.
The Secomea GateManager is an industrial gateway server empowering you to securely manage remote access to industrial control systems and equipment.
The Numatics Series Mark 15 is a line of directional control valves that combines high flow capacity with a compact design.
The ASCO Numatics Series 437 is a line of double-acting pneumatic tie-rod cylinders.
The AVENTICS™ Series 617 Sentronic LP is a family of highly efficient and cost-effective proportional valves.
The AVENTICS™ Series RPC round profile cylinders offer a wide variety of connection options
The AVENTICS™ Series GS gantry slides are designed for pneumatic systems that handle heavier loads and travel greater distances.
The AVENTICS™ Series BCC cylinders are bellow cylinders with removable mounting parts.
The AVENTICS™ Series ST4 sensors can be integrated with all AVENTICS™ pneumatic actuators.
The AVENTICS™ Series PM1 is a compact pressure switch for measuring compressed air and non-aggressive gases.
USAutomation's VersaDrive 11 leadscrew step motors were designed to be the most versatile linear positioning motors on the market.
To expand the potential configurations and overall solutions that NIDEC-SHIMPO could offer their customers, they have developed an impressive right-angle planetary gearbox offering.
The exceedingly successful TUBUS series from ACE is a perfect alternative, when masses don't need to be decelerated to an exact point. Available in more than 140 different versions, the profile dampers are used to slow down masses, particularly under extreme conditions.
Series D is a new valve system that ensures maximum flexibility and productivity across many primary industrial automation processes. It's available in both multipole and serial communication versions.
The ability to interface with the contents of the cabinet without opening the door prevents a lot of potential safety hazards associated with having an open electrical panel, such as Arc Flash.
Fir Tree Mount Tube Clip, Mounting Hole Dia .25", Panel Thickness .12"
The 3200 Series Conveyors with Intralox ARB Technology use innovative conveyance technology for merging, diverting, and aligning of product.
Designed to meet the demands of harsh process environments.
MI3000 connects shop floors and IT systems in real time.
Servo Motors with High-Resolution Encoder
Provides sag immunity, transient suppression and noise tolerance to handle the most demanding applications.
Available in 92-270mm frame sizes, MPP motors feature a segmented lamination design providing a very high torque to inertia ratio resulting in the highest acceleration rates of any Parker motor. Parker can provide custom modifications to all MPP motors.
Valin's drop-in pneumatic manifold replacement is a perfect solution for your obsolete chamber pneumatic manifolds on your aging fleet of Centura and Centura Ultima process tools.
EZQUAD Servo was designed to allow the rapid implementation of multi axis servo motor solutions in products requiring automation.
The ASCO™ Series 226 fluidic control valves are designed to handle both liquid and gases in analytical and medical device instruments.
The ASCO™ Series 055 are PTFE fluid isolation valves designed for use with highly aggressive liquids.
The OSPE-B Belt Actuator is designed to be Parker's most versatile yet cost-effective point to point positioner.
Data Collection is the next step in a journey that started with sensors, controls and networking. Creating data is pointless unless it is collected. Learn more below about technologies useful for collecting that data.
The Numatics Series Mark 55 valve line is designed for repeatable and reliable performance in harsh and challenging environments.
The Numatics Series NRL is a generation of linear, static locking devices that achieve new levels of performance.
The AVENTICS™ Series ED02 is a compact and powerful offering precise control solutions in a variety of applications.
The AVENTICS™ Series M is a stainless steel body air cylinder line that is the ideal solution for value-based designs.
The AVENTICS™ Series LCX is an economical line of linear slides with greater load carrying capabilities.
The AVENTICS™ Series BCR bellow cylinders are designed for applications that require very high forces.
The AVENTICS™ Series ST4-2P sensors measure two switching points in a 50 mm range using one sensor in a 4 mm C-slot.
The AVENTICS™ Series PE2 is a resistant and robust pressure sensor.
USAutomation's VersaDrive 17 leadscrew step motors were designed to be the most versatile linear positioning motors on the market. Based on a NEMA 17 hybrid step motor, they are available in thru-screw and fixed screw versions with a variety of drive nut and support bushing options.
Take your robot to the next level with FLEXWAVE. NIDEC-SHIMPO has a history of supplying the leading robotics and machine tool manufacturers in Japan.
With damping pads from the SLAB series, ACE provides solutions to effectively slow down loads impacting large and small surfaces. This means that these products are found in a wide range of damping technologies from ACE where oscillation begins or where damaging impacts in construction designs need to be slowed over a large surface.
Made entirely of stainless steel, this valve is the ideal solution for many industrial applications, even when besides high flow rates, the control of viscous fluids is also required. It is available in a range of different versions as well as special models to be installed in applications with flow direction under the poppet, in order to prevent or reduce the water-hammer effect when closing the valve.
In engineering, the term solenoid refers to a variety of transducer devices that convert energy into linear motion. The term is also often used to refer to a solenoid valve, which is an integrated device containing an electromechanical solenoid which actuates either a pneumatic or hydraulic valve, or a solenoid switch. Connectors may either be purchased individually or as part of a molded cable assembly.
ShrinkTrak Labels, 1-Sided, 4-Slit, 0.25" (6.35mm), PO-X, White, 1000/box
Dorner AquaGard LP series stainless steel conveyors are for dry, wipe down, and wet applications.
Maximize process efficiency by providing precise pressure regulation to downstream instruments.
The GT27 Series is a top end graphical operator terminal.
Servo motors for high-speed, high-accuracy, linear drive systems
Standard screw terminal connections and optional covers are offered for safety considerations.
The EZQUAD HR Stepper is a 4 Axis 256 micro stepping Driver + Controller measuring only 2.25" x 2.25" x 1.0
The ASCO™ Series 226 fluidic control valves are designed to handle both liquid and gases in analytical and medical device instruments.
The Direct acting solenoid valve for use with neutral or aggressive liquids in analytical instruments.
The Parker OSPE BHD belt driven actuator is the highest performing Series from the Origa System Plus family.
The Industrial Internet of Things is ushering in a digital transformation that enables companies to exploit technology and expertise better than ever before.
The ASCO Numatics Series 140 is a line of directional control valves with high-flow capacity (Cv to 16.5).
The AVENTICS™ Series ED05 ensures sensitive pressure control.
The AVENTICS™ Series KPZ is a compact cylinders based on the widely used standard NFE 49 004.
The AVENTICS™ Series SH guided linear slide is a motion device capable of heavy loads and moderately long strokes.
The AVENTICS™ Series BRB cylinders are the cost-optimized variant for lower loads.
AVENTICS™ Series SC4 are magnetic sensors for use in tight spaces.
USAutomation's VersaDrive 23 leadscrew step motors were designed to be the most versatile linear positioning motors on the market. Based on a NEMA 23 hybrid step motor, they are available in thru-screw and fixed screw versions with a variety of drive nut and support bushing options.
NIDEC-SHIMPO has been at the forefront of developing gear technology to fulfill the requirements of our OEM customers. Our close partnerships with our installed customer base provided much insight into their evolving need for more high-precision right-angle gearing options.
Vaccon's air-powered venturi vacuum generators are highly efficient, capable of reaching 28"Hg [948mbar], dirt tolerant, and include a silencer for quiet operation. Lightweight and compact, they can be easily mounted close to the vacuum point for fast response.
The Series QR rotary actuators are cylinders with a double piston, able to provide high torques while ensuring high stability and a precise rotary movement.
A cable gland is a device that allows the user to pass a cable, wire or tube into an enclosure while providing strain relief and sealing out dust, dirt, and liquids.
Capable of wide range applications assembly of small parts, heavy load handring and packing.
The lift & locate module provides 100 lbs of lift capacity at 90 psi.
Highly effective in removal of particles, moisture and oil aerosol from the instrument air.
Slim line power supplies combine exceptional high-power density with excellent efficiency.
A portable handheld graphical operator terminal.
EC Stopper Cylinder EC-ST11 is ideal as a workpiece-stopper on a conveyor line without air source.
Suitable for the most extreme environments, including hazardous locations and off-shore applications.
The ETH design offers unrivaled power density due to larger screw and bearing designs in smaller packages. User-friendly and offered in a diversified range of configurations.
The AV03/AV05 pneumatic directional control valves are smaller, lighter, and more efficient than similar valves.
The EZSV17WV Servo Motor Controller was designed to allow the rapid implementation of Brushless DC motor or Brush DC Motor solutions in products requiring automation.
The ASCO™ Series 226 fluidic control valves are designed to handle both liquid and gases in analytical and medical device instruments.
The ASCO™ Series 067 is a line of rocker solenoid fluid isolation valves for use with neutral or aggressive liquids and gasses.
Parker's mSR 80 is a miniature, high precision linear positioner measuring just 80 mm in width by 25 mm in height.
The AVENTICS™ Series MNI (ISO 6432) round cylinders for general machine construction are characterized by its robust and long service life.
The AVENTICS Series 589 have a robust polymer housing that can be mounted individually or as a block.
The AVENTICS™ Series ED07 offers proportional pressurization.
The AVENTICS™ Series KHZ is a non-standard short-stroke cylinder ideal for tight installation spaces.
The AVENTICS™ Series LC slides provide cost-effective light-duty guided linear motion in pneumatic cylinder applications.
The Numatics Series FE feed escapement device incorporates two double-acting cylinders that are cross-ported and internally sequence.
The AVENTICS™ Series SN2 sensors are compatible with a range of cylinders.
Out of the control cabinet and into the field: WAGO's new EPSITRON® IP67 Power Supply brings energy directly where it is needed thanks to a robust design and high degree of protection.
The STH is an excellent fit for mid-range index table applications that require high accuracy, flexible mounting and a large hollow shaft. This product sets the standard for rotary positioning performance of large inertia loads at an exceptional value.
The VDF Series is a unique Vaccon innovation that places the vacuum port and exhaust path inline making a straight-through venturi vacuum generator. These compact generators offer high flow rates up to 120 SCFM [3400 LPM] and high vacuum levels up to 25”Hg [847mbar].
The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary movement, generated by a motor, is converted into a linear movement by means of a recirculating ball screw. Available in 6 sizes, the Series 6E has dimensions based on the ISO 15552 standard and it is therefore possible to use the mounting accessories of the pneumatic cylinders.
Distribution solutions are a critical component in electrical installation and control panel design. WAGO’s new Push-Button and Open Tool Slot TOPJOB® S Distribution Terminal Blocks are extremely compact and designed to provide efficient potential distribution from a single terminal block.
2-Piece Cable Tie/Fir Tree Mount, 11.8"L, 0.256" - 0.276" Mounting Hole, 50lb, PA66HIRHS
Thermal Transfer Labels, Self-Laminating, 1.0" x .5" x 1.43", 2 Across
Dorner AquaGard 7100 Series is an industry ready stainless steel flexible chain conveyor.
Designed to control water, air, inert gases, steam and non-aggressive fluids.
Extreme slim-line design (6mm) saves space in your control cabinet.
A portable handheld graphical operator terminal.
Rotary servo motor with one-touch auto-tuning, vibration suppression, and machine diagnosis functionality.
Compact, rugged power supplies designed to power many of your industrial control and instrumentation devices and equipment.
The eCL system is an innovative closed loop stepper motor and controller that utilizes motor mounted feedback to constantly monitor shaft position. Actual motor shaft position data is updated every 25 microseconds allowing the drive to compensate for sudden load changes ensuring accurate position control.
Aventics (ASCO™ NUMATICS) directional control line of valves are available in a wide range of port sizes and Cv flow capacity.
The EZStepper was designed to allow the rapid implementation of stepper motor solutions in products requiring automation.
The ASCO™ Series 226 fluidic control valves are designed to handle both liquid and gases in analytical and medical device instruments.
ASCO™ Series 082 is a line of miniature solenoid valves designed for use with neutral or highly aggressive liquids.
The mSR 100 is a miniature, high precision linear positioner which uses dual precision grade square rails for its guidance.
The AVENTICS™ Series CCI (ISO 21287) cylinders stand for innovative, compact construction and an easy to clean design.
The AVENTICS Series LS04 are lightweight spool valves and save space with their polyamide and aluminium housing. The valves are suitable for direct mounting onto moving machines and system parts.
The AVENTICS Series ED12 offers proportional pressurization.
The ASCO™ Numatics Series 441 is a line of robust, compact short-stroke pneumatic cylinders.
The AVENTICS™ Series GPC is distinguished by high side load capacity and torsion protection.
The AVENTICS™ Series RDC is flexible diaphragm cylinders with low friction, and can be actuated at low pressure.
AVENTICS™ Series SN3 are magnetic sensors ideal for demanding environments.
Made of welded stainless steel, plastic chain and belts, Dorner's food processing conveyors are designed for fast, safe sanitation in any environment.
Cleanroom specification and dust/splash-proof specification added in cost-effective IXP Series giving more variations to the lineup.
The levers on the WAGO MULTI CONNECTION SYSTEM MINI (MCS MINI) provide rapid in-the-field connections. The connector’s design facilitates wiring subassemblies – easy-to-access and straightforward connection points - make all the difference at the worksite.
The CPV15 Series Integrated Solenoid Valves (3/2 Way) by AirTAC.
The Ring-cone mechanical variable speed drive was one of the first technologies developed during NIDEC-SHIMPO’s storied past.
The DF Series of high flow material conveying vacuum generators provide a simple, reliable and cost effective method of in-line transfer of bulk materials, complex shapes, individual objects, selvedge.
Series 5E axes are mechanical linear actuators in which the rotary movement generated by a motor is converted into a linear movement by means of a toothed belt. The Series 5E, available in 3 sizes, 50, 65 and 80, is realized by means of a special self-supporting square profile, in which the components have been completely integrated, assuring compactness and light weight. The presence of a recirculating ball guide grants high stiffness and resistance to external loads.
The ASCO™ Series 062 rocker isolation valves are designed for use with neutral or highly aggressive liquids.
2-Piece Cable Tie & Edge Clip, 8.0" Long, EC5A, 1–3 mm Panel, 50lb, PA66HS/PA66HIRHSUV
Clean Start Thermal Transfer Ribbon, Soft Resin, 4.33" x 242'
Dorner AquaGard 7350 series stainless steel conveyors are for dry, wipe down, and wet applications.
Designed to control water, air, inert gases, steam and non-aggressive fluids.
Maximize space in your control cabinet while providing a high efficiency rating up to 90%.
The GT25 Series is a high performance and cost-effective graphical operator terminal.
LM-Series Servo Motors are available with three different core types and one core-less option for max flexibility.
Fully complies with IEC and NEMA standards and are available with IEC touchproof covers (IP20).
This industrially hardened cylinder product utilizes an all-steel contruction and achieves far greater thrust capacities than typical electric cylinders. Maximum thrust up to 356,000N (80,000lbs).
ES05 is a valve system that has been designed especially for standard pneumatics applications and industrial automation.
The ASCO™ Series 065 is a family of miniature solenoid valves designed for analytical and diagnostic equipment.
The ASCO™ Series RB is a line of miniature solenoid valves designed for use with air and inert gases.
The ASCO™ Series 110 is a line of rocker solenoid fluid isolation valves for use with neutral or highly aggressive liquids.
Valin offers miniature solenoid valves that are critical in the analytical and medical industries.
The AVENTICS™ Series SSI are short stroke cylinders in accordance with the latest ISO standard 15524.
The AVENTICS Series ES05 is ideal for standard pneumatic applications. Its simplicity and modularity make it especially well-suited for applications that require quick changes or extensions.
The AVENTICS Series AS3-SV consist of redundant 3/2 valves with external pilot and spring return according to the requirements of ISO 13849-1-2 for safety functions safe exhaust” and prevention against unexpected start-ups”.
The AVENTICS™ Series EV03 is ideal for applications requiring infrequent pressure adjustments.
The Numatics Series NB is a line of compact barrel cylinders that have competitive interchangeability with other rodless cylinder products.
The AVENTICS™ Series MSC mini slides have a compact design, require minimal space and can be configured for any automated handling task.
The AVENTICS™ Series 102 is cost-efficient solution to generate high forces for press application for example.
AVENTICS™ Series SN5-X are Magnetic Sensor that responds to ferromagnetic material.
Sensors that can withstand frequent and intensive cleaning and disinfecting cycles in an injection molding environment.
Digitalization in this global economy has become necessary for modern manufacturing facilities. Companies are leveraging Cloud services to optimize their production systems. Real-time data collection, an important part of this process, can be a daunting process.
The 6V Series Solenoid Valves (5/2 Way, 5/3 Way) by AirTAC.
A built-in controller at this size resolves all kinds of small air cylinder problems! Select from three types according to the application: Slider, Rod, Table.
Vaccon Air Amplifiers easily and safely handle porous objects that many consider too challenging to handle with vacuum. Vaccon air amplifiers are field-adjustable to meet your process or product specifications. With its inline, straight through design – dirt and debris pass right through, there’s no clogging, no downtime.
The servo drives DRWB, compact and especially optimized for the brushless Camozzi motors, are completely digital and available in the power classes 100, 400, 750, 1000 W. Equipped with vector mode and the function of Autotuning and containment of vibrations, they are made in such a way to easily perform replacements and to have a two-line alphanumeric display with 4 control keys on the servo drive. A digital pulse interface allows control of the direction, position, speed and torque.
Featuring an increased maximum width and a heavier payload capacity, the 2700 Series Medium Duty conveyor is designed for material handling, eCommerce, and logistics applications.
Wiring Duct Cover for 1-1/2" Duct, 6 ft Long, PVC, White, 120 ft/carton
Clean Start Thermal Transfer Ribbon, Hard Resin
Dorner AquaPruf conveyors are improving food safety with hygienically engineered stainless steel conveyors.
Miniature Monobloc solenoid pilot valves that are suitable for use with air or inert gas.
Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet.
The GT25 Open Frame Series is a high-performance graphical operation terminal.
Direct control with the accuracy of a servo motor.
Offers the exceptional reliability and advanced features required for industrial use.
Safety Light Curtains, Safety Laser Scanners, Safety Switches & Operator Controls, Perimeter Guarding
Parker’s I-Force Ironless Linear Motors offer high forces and rapid accelerations in a compact package. With forces ranging from 24.5 N (5.5 lbf) to 878.6 N (197.5 lbf) continuous up to 108.5 N (24.5 lbf) to 3928 N (883 lbf) peak, the I-Force family offers a superior combination of performance and size.
Aventics CL03 Series is the ideal valve system for pneumatic solutions in the food industry.
The ASCO™ Series 076 is a line of miniature solenoid valves designed for use with air and inert gases.
The ASCO™ Series S are miniature general service solenoid valves designed for use with air and inert gases.
The ASCO™ Series 252 are dental manifold assemblies that reduce dental delivery system complexity.
The AVENTICS™ Series 167 is a tie rod cylinder offers the highest robustness for tough environment.
The AVENTICS Series TC08 valve system is the perfect choice for applications calling for lightweight valves with high flow rate in a small space.
The AVENTICS Series 581 complies with the valve standard ISO 5599-1. Due to the level of modularity, the Series offers all valve functions, integrated throttle valves, various pilot coils, and a comprehensive range of accessories.
The AVENTICS™ Series EV12 with its compact design hides its large flow capacity.
The AVENTICS™ Series CVI is a cylinder valve unit with two ISO cylinder Series and five freely combinable valve Series.
The AVENTICS™ Series TWC is a compact and powerful cylinder with its double piston offering also an high non-rotating accuracy.
The Numatics Series KG is a robust air cylinder line that is designed to perform in the most demanding valve automation applications.
The AVENTICS™ Series ST9 sensors are specifically developed for short-stroke cylinders.
The AC-150-2473 Endura TxZ Remote Gas Box pneumatic EV manifold is a 10-station manifold with 2x3/2 pneumatic valves (20 valves total).
From miniature conveyors moving small medical products to large tote systems for prescription fulfillment applications, Dorner has a wide variety of medical solutions.
The GPFR Series Precision Filter and Regulator by AirTAC.
Large single-axis types with a 400kg horizontal payload are available now! Mid Support suppresses deflection of the ball screw, making long-stroke and high-speed operations possible.
Robots and robotic tooling help you increase productivity, improve product quality, and reduce costs. The right End-of-Arm Tools (EOAT) can improve both the flexibility and cost effectiveness by working with and complementing the robot. Vaccon designs vacuum tooling using modular components that are compact, lightweight, durable, and easy to assemble. This creates flexible, streamlined End-of-Arm Tooling that works in harmony with the robot.
Series DRCS drives, compact and optimised in one size, are capable of controlling all Camozzi Stepper motors with two-phase and micro-stepping feed. The use of the micro-stepping control technology (up to 1/16 of a step) enables the drive to almost replicate a sinusoidal current while considerably reducing the natural resonance of the motor itself.
The all-new Compact Controller 100 joins WAGO’s award winning line of PLCs. This ultra-compact controller offers powerful programming combined with on-board I/O.
Wiring Duct Cover for 2" Duct, 6 ft Long, PVC, White, 120 ft/carton
The Dorner 2200 Modular Belt conveyors are ideal for applications in metalworking, packaging, assembling and general manufacturing.
Designed to proportionally control the flow of air, inert gases, and liquids with high repeatability.
Flexible process data design for simultaneous transmission of several variables.
The GT25 Wide Series is a high performance and cost-effective graphical operator terminal.
High-speed, high-torque rotary servo motors for fast, precise machine operation.
Can be mounted almost anywhere on a machine, conveyor, or wall.
Our new Generation II Stealth® Series provides higher radial load, increased service life and ease of mounting than comparably sized planetary gearheads.
Configurable valve systems, Multipole, Fieldbus
The ASCO™ Series 088 solenoid valves are designed for use with air and inert gases.
The ASCO™ Series 068 flapper isolation valve is designed for use with neutral or aggressive liquids and gases.
The ASCO™ Series 283 lever mechanism isolation valves are ideally suited for quickly flushing systems of corrosive media.
The AVENTICS™ Series C12P is a cylinder Series according the standard CNOMO NFE 49-001 and offer a replacement for existing application.
The AVENTICS Series CD consists of various spool valves with an extremely durable die-cast zinc housing.
The AVENTICS Series 581 complies with the valve standard ISO 5599-1. Due to the level of modularity, the Series offers all valve functions, integrated throttle valves, various pilot coils, and a comprehensive range of accessories.
The AVENTICS™ Series EV18 is a family of highly efficient and cost-effective proportional valves.
The AVENTICS™ Series RTC rodless cylinders offer optimized stroke length in a compact size.
The AVENTICS™ Series RCM with its rotary modules can perform all standardized rotary and swivel movements.
The AVENTICS™ Series ACCU is an economical pneumatic linear actuator line that contains an internal linear resistive transducer.
The AVENTICS™ Series SM6 are analog distance measuring sensors.
FR-D700 is Mitsubishi Electric’s class-leading range of micro drives.
Cleanroom specification and dust/splash-proof specification added in cost-effective IXP Series giving more variations to the lineup.
Made to take the high temperature, high pressure washdowns associated with food processing and other extreme cleaning condition.
Vaccon offers a wide range of vacuum cup styles, materials, sizes and capabilities. Fittings in multiple styles are available individually or as a cup assembly for each cup group. The dual durometer and non-marking cups have their own fitting groups.
The Camozzi motors Series MTB have been designed to be connected in an easy and practical way to the new product range within electrical actuation, being able to drive both electromechanical cylinders and axes. The Series MTB of synchronous AC Brushless motors is available with a power of 100, 400, 750, 1000 W.
The Intelligent Parker Amplifier or IPA, is a 1.5 axis servo drive/controller based on the ACR control platform.
Wiring Duct Cover for 3" Duct, 6 ft Long, PVC, White, 120 ft/carton
Sanitary Vertical Belt Conveyors for Elevating Bulk Products
A stand-alone control device used for open-loop, closed-loop, or dual-loop (cascaded) process control.
High-speed, high-precision capabilities help to increase the productivity of your machines.
The GT25 Rugged Series HMI is a damage-resistant terminal built to withstand extreme environments and conditions.
Features varnished coils with class +180°C insulation system and +115° rise under full load.
Whether you need push/pull motion or rotational motion, Valin has you covered. Cleanroom types and splash-proof/ dust-proof types available.
Stealth® MultiDrive (MD) offers three different output options for true flexibility. MultiDrive models include low-ratio, dual-shaft and hollow-shaft options in a compact, right angle package.
The CCL-IS CleanLine air cylinders meet ISO 15552 standards and feature a cleaner profile design than competitor’s cylinders.
The ASCO™ Series 090 is a line of miniature solenoid valves designed for use with air and inert gases.
The ASCO™ Series 068 flapper isolation valve is designed for use with neutral or aggressive liquids and gases.
The ASCO™ Series 385 rocker isolation valves are designed for use with the neutral or highly aggressive liquids used in analytical instrumentation.
The Numatics Series 12 is a line of miniature pneumatic filters, regulators, and lubricators ideal for applications requiring clean air in a limited space.
The AVENTICS™ Series PRA offers a direct mounting for SM6-AL sensor to achieve a perfect distance measurement.
The AVENTICS Series CD consists of various spool valves with an extremely durable die-cast zinc housing.
The AVENTICS Series 581 complies with the valve standard ISO 5599-1. Due to the level of modularity, the Series offers all valve functions, integrated throttle valves, various pilot coils, and a comprehensive range of accessories.
The AVENTICS™ Series 614 SentronicPLUS is a 3-way digitally operated pressure regulator valve.
AVENTICS™ Series GSU cylinders are the ideal basis for many handling systems.
The AVENTICS™ Series TRR is a rotary cylinder based on two ISO cylinders and a rack and pinion gearbox.
The AVENTICS™ Modular scraper system for Series PRA/TRB and ITS cylinders offer more flexibility.
The AVENTICS™ Series SM6-AL are analog distance measuring sensors.
The FR-F800 is a pump and fan control VFD optimized for maximum energy saving.
Optimum power supply for the sophisticated automation solution with IO-Link communication interface
The AlphaStep AZ Series stepper motors offer high efficiency, low vibration and incorporates our newly developed Mechanical Absolute Encoder for absolute-type positioning without battery back-up or external sensors to buy.
Anyone who wants to lift or lower loads with control and without excessive strength relies on the industrial gas springs from ACE.
Designed with large thru bores, Vaccon fittings connect to vacuum cups, vacuum generators and spring levelers ensuring unrestricted vacuum flow for safe material handling operations. For plumbing flexibility, Vaccon offers 9 different fitting groups with various thread sizes.
The new Camozzi motors Series MTS have been designed to be connected in an easy and practical way to the new product range within electrical actuation, being able to drive both electromechanical cylinders and axes.
Optimum performance through slotless motor technology and performance-matched mechanical elements and feedback devices.
High-Density Slotted-Wall Wiring Duct, 1" x 2", Non-Adhesive, PVC, White, 120 ft/carton
Dorner’s Precision Move technology is designed to move product to the exact location, at the exact time, in the exact position.
Precision edge roller pallet & tray handling conveyor.
Designed to control system pressure to a constant maximum set point.
MR-J5 servo amplifiers allow for high-speed precise control of MR-J5 servo motors.
Space-saving four-wire transmitter that isolates and converts a frequency or pulse input to a proportional control signal.
Boasts one of the highest efficiencies available in the market today, in spite of its small size.
You were tireless in your support and it will not be forgotten!