Valin's heat trace cables come with an unrivalled 10-year manufacturer warranty for complete peace of mind. Valin carries heat trace cables that are suitable for process maintenance, pipe and vessel freeze protection and roof and gutter de-icing applications. With this wide variety of cables available we can design systems for the most demanding and complex applications while helping reduce costs, increase sustainability, and decrease risk.
Heat Trace Cables
Download Valin's Electric Heat Trace Installation Guide
Valin's team can assist with...
- Design / Engineering / Drafting
- Bid assistance - Takeoffs, recommendations for RFI (Request for Information)
- Job walks to evaluate as-built piping
- Pre-construction contractor best practice install training
- Assistance laying out equipment and circuits
- Progress checks during installation
- Controls programming
- Startup assistance, troubleshooting
- Owner training
- Local inventory
We have an incredibly knowledgeable team of customer service and application engineers just a phone call away to
answer all of your questions.
Self-Regulating Heat Trace Cables
Self-regulating cables are flexible, can be cut-to-length in the field and can be single overlapped without fear of burnout in areas where complex piping and equipment require additional heat trace cable. Heating cable are manufactured for use on 120 and 208 to 277V and maintain temperatures to 302 F (150 C). Equipped with a ground braid and optional TPR or FEP jacket, self-regulating cables are third party tested and approved for use in harsh corrosive and hazardous area applications.
HTS-6 Self-Regulating Commercial Heat Trace Cable
HTS-6 Self-Regulating Commercial Heat Trace Cable
The HTS-6 commercial grade heater cable is designed for use in both indoor and outdoor locations as well as for residential and commercial freeze protection on water pipes and drain pipes. In roof and gutter applications, the HTS-6 provides a pathway for flowing water on the roof or in gutters and downspouts to safely distance itself from the building before the opportunity to re-freeze and cause damage.
LT Series Self-Regulating Heat Trace Cable
LT Series Self-Regulating Heat Trace Cable
Nelson Heat Trace LT Series self-regulating heater cable is ideal for use in maintaining fluid flow under low ambient conditions. LT Series heating cables are available in 120 and 240 voltages and are designed for use in ordinary (unclassified) and hazardous (classified) locations. Typical applications for this product are freeze protection and low watt density process temperature systems such as product pipelines, fire protection, process water, dust suppression systems, lube oil, condensate return and structure anti-icing.
HLT Series Self-Regulating Heat Trace Cable
HLT Series Self-Regulating Heat Trace Cable
Nelson Heat Trace HLT Series self-regulating heater cable is ideal for maintaining flow over a wide range of operating temperatures. The product is used for freeze protection of periodically steam (200 psig) cleaned pipes and temperature maintenance for 121 C (250 F) or lower processes. HLT Series heating cables are available in 120 and 240 voltages and are designed for use in ordinary (unclassified) and hazardous (classified) locations. Typical applications include hydrocarbon and chemical product piping.
XLT Series Self-Regulating Heat Trace Cable
XLT Series Self-Regulating Heat Trace Cable
Nelson XLT Series self-regulating heat trace cable is ideal for maintaining flow over a wide range of operating temperatures. The product is used for freeze protection of periodically steam (420 psig) cleaned pipes and temperature maintenance for 150 C (300 F) or lower processes. XLT Series heating cables are available in 120 and 240 voltages and are designed for use in ordinary (unclassified) and hazardous (classified) locations. Typical applications include hydrocarbon and chemical product piping.
Hazardous Area High Temperature Heat Cable
Hazardous Area High Temperature Heat Cable
The Series KK high-temperature constant wattage heating cable is ideal heating long run applications that require high temperature extreme flexibility up to 500F. Constant Watt is manufactured with precise and constant temperature output regardless of ambient and surface temperatures. The easily installed cable can be cut to length and terminated at the job site and is approved for both ordinary and hazardous area environments.
MI Mineral Insulated Heating Cable
MI Mineral Insulated Heating Cable
MI mineral insulated heating cables provide rugged and reliable heat tracing for a variety of demanding applications. The high nickel alloy sheath, magnesium oxide dielectric insulation and resistance wire construction allow the tracing of equipment up to 1100F maintenance temperatures and excellent resistance to many corrosive environments. At lower temperatures, watt densities of up to 50 W/Ft can be designed. Please contact factory for cable maintenance temperature above 400F.
Industrial Heating Tape
Industrial Heating Tape
AWD Duo-Tapes and AWH Mono-Tapes are heating tapes that have been specifically designed for industrial use such as vacuum bake-outs, exhaust gas sampling and hot melt transfer pipes. These heating tapes work well for those applications that require a helping hand. When the temperature requirements exceed the capabilities of the elastomeric heating element, AWD and AWH heating tapes will allow for the temperature requirements to be met safely and efficiently.
Hands-On Assistance from Technical Specialists
Need help?
Fill out our heat trace application form and we will have one of our process heating experts contact you, or call (855) 737-4718 to speak to one of our experts immediately.
Valin carries electric heat trace cables that are suitable for process maintenance, pipe and vessel freeze protection