Pneumatic Connection from Camozzi Pneumatics

Available in a wide variety of shapes and configurations, Camozzi pneumatic fittings are made of brass, technopolymer, and stainless steel for ease of installation on a variety of devices, machines, and tubing  where sealed reliability matters.


Pneumatic Connection from Camozzi Pneumatics Product Families:


Push-in/Super Rapid Fittings

  • Series 600 Nickel-Plated Brass Push-In Fittings
    Series 6000 Nickel-Plated Brass Push-In Fittings
    Camozzi’s all metal fittings are 100% electrolytic nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and lock the tube quickly and effortlessly.

    Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.

  • Series ND (DOT) Nickel Plated Fittings
    Series ND (DOT) Nickel-Plated DOT Fittings
    • Meets all requirements for Federal DOT
    • Standard 571.106* 49 CFR Ch. V
    • Meets all requirements for SAE J2494-3
    • Temperature Range: -58°F to 200°F
    • Electrolytic Nickel Plated brass body
    • with a low temperature BUNA-N O-ring
    • For use with SAE J844 A & B Nylon® tubing
    • Compressed air applications
    • Thread pre-coated with sealant

  • Series 7000 Composite Push-In Fittings
    Series 7000 Composite Push-In Fittings
    Series 7000 push-in composite fittings are compact and lightweight. They offer easy maintenance of the collet and internal o-ring seal. All materials can be easily recycled.

    The nickel-plated brass collet maintains the same technical characteristics as the other nickel-plated brass fittings. It provides a uniform grip around the entire surface of the plastic tube. This ensures high reliability and long service life, especially after several connections and disconnections of the tubing.

    Series 7000 composite fittings are especially suited to lightweight applications and compact assembly locations, typical in the automation markets.



Pipe Fittings

  • Series S2000 Nickel-Plated Brass Pipe Fittings
    Series S2000 Nickel-Plated Brass Pipe Fittings
    When involved in factory maintenance or plant installation it is often difficult to be absolutely certain which size of fittings will be required. Pipe fittings provide a cost effective solution to this problem. The full range includes straight, L-shaped, T-shaped and cross piece male or female couplings and are available in a variety of thread sizes up to 3/4”.

    The addition of the Camozzi Sprint® seal to twelve different models of pipe fittings eliminates the need to use liquid sealants or tape and save a considerable amount of time during installation. The Sprint® fitting can be connected and disconnected several times. 
    Material: brass OT58 UNI 5705 (nickel-plated).
    T. min. - 40°C (-40°F)
    T. max. +120°C (250°F)

     
  • Series 2000 Nickel-Plated Brass Pipe Fittings
    Series 2000 Nickel-Plated Brass Pipe Fittings
    When involved in factory maintenance or plant installation it is often difficult to be absolutely certain which size of fittings will be required. Pipe fittings provide a cost effective solution to this problem. The full range includes straight, L-shaped, T-shaped and cross piece male or female couplings and are available in a variety of thread sizes up to 3/4”.

    The addition of the Camozzi Sprint® seal to twelve different models of pipe fittings eliminates the need to use liquid sealants or tape and save a considerable amount of time during installation. The Sprint® fitting can be connected and disconnected several times.
    Material: brass OT58 UNI 5705 (nickel-plated).
    T. min. - 40°C (-40°F)
    T. max. +120°C (250°F)


Tubing, Spirals, and Accessories

  • Nylon Tubing, Series 1411, DOT TEA
    Nylon Tubing, Series 1411, DOT TEA
    Material:  Nylon 11 (Polyamide)
    Melting Point:   354° ± 4° (flame retardant rating UL-94 HB)
    Water absorption (ASTM D-50):  1.1%
    Operating Pressure:  From 0 - 250 psi (See Working Pressure Table)
    Bursting Pressure:  1000 psi
    Hardness:  78 Rockwell R
    Tensile Strength at Break (D-638):  9500 psi
    Elongation at Break (D-638):  360 psi
    Flexural Modulus (D-790):  47,000 psi
    Tube Diameter:  1/8”, 5/32”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”
    Fluid:  Compressed air [for other types of fluid please contact our engineers]
    Operating Temperature:  -60°F - 180°F * (See Working Pressure Table). Meets UL-94 HB testing requirements.

     
  • Polyurethane Tubing Series 1422
    Polyurethane Tubing Series 1422
    Material:  Polyurethane (Ether Based), PUR 95A
    Vacuum Rating:  to 28” Hg
    Operating Pressure:  From 0 - 230 psi (See Working Pressure Table)
    Bursting Pressure:  690 psi
    Hardness:  95 Shore A
    Tube Diameter:  1/8”, 5/32”, 1/4”, 5/16”, 3/8”, 1/2”
    Fluid:  Compressed air [for other types of fluid please contact our engineers]
    Operating Temperature:  -40°F - 165°F

     
  • Tubing, Spirals, and Accessories Pneumatic Connection
    Plastic tubes cutter Model PNZP-12
     
  • Tubes clamps Model MPL
    Plastic tubes clamps
     
  • Tubes Cutters Model PNZ
    Small and large tubes cutter
     
  • Model RT - Metallic Tubing Scribing Tool
    For high pressure applications with stainless steel or metallic tubing up to 1200 psi, so long as the tubing is cut and scored according to the procedures and tool geometry provided by Camozzi Pneumatics, Inc. To be used with Camozzi 6000 Series brass fittings and collets ONLY.


Talk to one of our experts today at (855) 737-4716, or fill out our online form to learn more.





 

Motion Control and Automation
A lesson for me is that I need to involve you earlier in the program.

You were tireless in your support and it will not be forgotten!

Valin Was There For Us
When we needed technical assistance and applications support, Valin was there for us. Their knowledgeable engineers saved us an invaluable amount of time, helping us get up and running quickly. We are very happy with their services.