Videos

This 6-axis precision pick and place stage system by PBA Systems was engineered from the ground up and delivered in 10 weeks. This high-performance stage system was designed to optimize throughput, size and cost, without sacrificing positioning performance.

For machinery or instrument builders who need smooth motion and high precision, Parker offers the XLM series. The XLM is a linear positioner that provides micron level precision in three different profile widths from 125mm to 200 mm. Its modular design allows for easy assembly of multi-axis systems.

The video provides a detailed guide on setting up the Autonics BD-100R laser measurement sensor using the ATDisplacement software. Tom Trinh, Senior Application Engineer at Valin Corporation, demonstrates the setup process.

This video will illustrate how to send a Modbus TCP command to an IAI RCON with the Ethernet option - ET. That allows you to control the RCP6 actuators, to turn on the servo on, and to home the actuators, as well as commanding the actuators to go to a certain position with the specified velocity, acceleration, deceleration, and so forth.

Tom Trinh, a Senior Application Engineer at Valin Corporation, provides a detailed explanation on how to connect an Oriental Motor EtherCAT drive (model AZD-KED) to a PLC. The demonstration uses an Omron NX series PLC, but the process is applicable to any PLC supporting EtherCAT, such as Allen Bradley, Siemens, and Mitsubishi.

Valin is a TopWorx™ GO™ Switch stocking distributor.

Introducing Acromag's new DT Series. These Programmable Dual Channel Transmitters have two independent signal conditioners in one module, saving you money and saving you space at only 17.5 mm wide.

This video illustrates how to setup a remote IO on a Mitsubishi FX5U over Modbus TCP.

This video will demonstrate how to setup a Mitsubishi FX5U CPU to control a Mitsubishi E-800 Inverter.

This video will illustrate how to communicate to the P drive from Parker using Modbus RTU and you can send a command down to turn on the servo, to home it as well as jog it, and also execute the index whatever the position you want the motor to go and everything once again using Modbus RTU and the RS422 cable.

This video will illustrate how to send Modbus RTU command to an IAI PCON controller to control the actuator.

This video will illustrate how to set up an IAI RCP6-RRA pulse press.

Patlite's USB controlled signal tower can be used immediately because it has USB bus power and does not require a dedicated driver.

Patlite's IO-link devices have many advantages, among them are they are controllable via IO-link, are easy to install, have seven selectable colors in various alarms, non IO-link sensors are supported , and they are highly visible so you can quickly understand operating instructions and status.

You have endless possibilities with Patlite's Ethernet Programmable LED Signal Tower. Get power over ethernet, easy connection and communication with one cable, and easily control and receive feedback with various commands.

High-tech OEM machine builders use high-precision motion stages to achieve high throughput and micron-to-sub-micron level accuracy.

As Valin prepares for the holidays, we’d like to take some time to reflect on this past year and just how thankful we are for the relationships we share and how hopeful we feel for the future.

The Parker CBG series check valves are designed for unidirectional flow control of fluids and gases. The distinctive floating ball valve design manages difficult service conditions in power generation, oil, and gas production, and chemical processing.

MPI series tube connection for hydrogen applications sealing hydrogen the smallest molecule is tough but designing a connection that offers easy assembly and remake ability is even tougher.

Welcome to another product highlight from the Parker instrumentation products division. The Parker Phoenix brand 38 inch ID three valve and five valve radial pattern manifolds are expertly developed for effectiveness and user friendliness. 

Welcome to another Parker Instrumentation Product Highlights. Supporting the global decarbonization efforts through a broad range of solutions for various gas and liquid hydrogen applications.

Welcome to the Parker Instrumentation Products Division's Insight Moment. Today we want to discuss our latest product development into the clean energy market of hydrogen. 

This video will illustrate how the Beijer CODESYS Controller PLC XP-350 interface with the Parker Drive PD-04C and controlling the Parker servo motor.

This video will illustrate how to use the Parker support tool to test out the drive and the motor and the cable to make sure everything is working before you connect to the PLC.