How Yokogawa Took a Plant from Semi-Automated to Autonomous
Submitted by Yokogawa
The next generation control technology using reinforcement learning-based AI ( FKDPP) will autonomize areas that could not be automated with existing control methods while ensuring safety and improving productivity. FKDPP is a disruptive innovation that allows for a different dimension of control, particularly in such areas. This AI technology can be applied in the energy, materials, pharmaceuticals, and many other industries.
Read More
Semi Fab Eliminates Air Leaks with Easy to Install Manifold Retrofit Kits
One of Valin's semi fab customers had an all-too-common problem with their pneumatic manifoldsair leaks. Learn how they eliminated this problem with Valins Pneumatic Manifold Retrofit Kit upgrade.
Read More
Flow Measurement and Control for Diamond Slurry in Semi Processing
Accurate flow measurement and control of slurry dispense in semiconductor polishing and lapping tools is critical. Malema's PFA Coriolis Mass Flow Meter and Flow Controller is the only flow measuring technology that is successfully used in such high viscosity applications.
Read More
Semi Fab Upgrades Gas Cabinet with Echoline to Prevent Costly Shutdowns
Precision Sensors' Echoline Smart Sensor with auto diagnostic provides Semi Fabs with UL991 and S2 compliance and provides stability with no need for regular inspections.
Read More
Semi Fab Reduces Wafer Scrap with Pneumatic Manifold Retrofit Kits
Valin helped NXP Semiconductors reduce their wafer scrap costs with its Endura Pneumatic Manifold Retrofit Kits. See how it was done and how much they saved.
Read More
Silicon Manufacturer Reduces Reactor Turnaround Frequency
Submitted by Tyler Kee || Valin Corporation
A high-purity silicon material manufacturer was looking for a solution to ensure a positive shutoff of gas flows. The company produces 500 tons of high-purity silane gas, 1,000 tons of electronic grade polysilicon, and 18,000 tons of granular polysilicon annually.
Read More
Chemical Dispensing Company Decreases Control Integration Time
Submitted by Ray Marquiss || Valin Corp.
A customer that designs cost-effective chemical dispense system contacted Valin for automation assistance. Valin's application engineering and sales team showed the engineers at the company how we could save them money and speed up their delivery time. Lean more.
Read More
Watlow Gas Regeneration Heater Helps Refinery Meet Regulations
To comply with the Clean Air Act, a coal-fired power plant needed to heat flue gas to 455C (850F). Watlow engineered a customized design that would meet the customer's needs.
Read More
Cost Effective Filtration Manifold for Semiconductor Industry
Submitted by Brian Sullivan || Valin Corporation
A leading manufacturer of semiconductor wafer fabrication equipment was in need of a filter manifold (skid) for their new N2 on-site generation unit. The company develops innovative solutions that help their customers build smaller, faster, more powerful, and more power-efficient electronic devices.
Read More
Semiconductor Co Drastically Reduces Chemical Cooling Time
Submitted by Cory Calderon || Valin Corporation
A large semiconductor chip manufacturer approached our customer with a unique challenge and opportunity in cooling the highly concentrated acids and caustic chemicals used in production. Learn about the solution that helped increase the chip manufacturer's throughput and the safety of their staff.
Read More
Semiconductor Supplier Improves Efficiency of Tool Change Outs
Submitted by Josh Shearer || Valin Corporation
A leading supplier of semiconductor-based solutions was looking for ways to improve the efficiency of routine maintenance change outs for their clean room tools. They were searching for something that would allow the technicians to be more efficient and organized while working in the clean room.
Read More
Chip Manufacturer Increases Wafer Production | Heating Blanket
Submitted by Paul Lyman, Valin Corporation
A semiconductor company was given a large government contract to manufacture a special chip for a night vision application. Learn how they were able to increase wafer production by using a custom heating blanket.
Read More
Industry 4.0 Intelligent Workstations Help Increase Production
Submitted by Corey Foster & Bosch Rexroth
An Industry 4.0 Workstation is a semi-automated workstation that provides a link between the real world and the virtual world. It is a versatile solution that enables a highly efficient use of resources, great planning, reliability and short throughput times. Learn more.
Read More
Cutting Cords to Variable Specified Lengths CT Effects Example
Submitted by IAI
Motorizing the feed process increased production, and significantly lowered electricity and labor costs.
Read More
Changing Air Cylinder to ROBO Cylinder Improved Cycle Time
Applying a liquid solution to a copper twisting machine CT-Effects Application Example
Read More
Hundreds of Hours of Programming Time Saved for Semi Mfr.
Submitted by Cory Calderon
A semiconductor manufacturer of wafer handling machines and wet benches was looking for a way to reduce the engineering hours spent on writing code. Semiconductor companies are commonly required by their customers to be SECS/GEM compliant and this can be a laborious and costly task.
Read More
Electronic Test & Measurement Manufacturer Improves Production
Submitted by Michelle Fischer
A large electronic test & measurement instruments manufacturing company was using a legacy production tool for Mesh Cutting gold for electrical circuit connections that was developed over 20 years ago.
Read More
Hardware Costs Reduced for Waste Disposal Systems Manufacturer
Submitted by Corey Foster
Over the last few years a leading manufacturer of waste (linen/trash) disposal systems have relied on a well-known brand PLC and their HMI software as the backbone of their controls systems.
Read More
Communications Testing Equipment Mfr Improves Process Speed
Submitted by Michelle Fischer
Valin Solves Multiple Problems for Major Communications Testing Equipment Manufacturer.
Read More