Food & Beverage

Decarbonization efforts worldwide, led both by industry leaders and legislation, have increased efforts to shift fossil fuel use to renewables. One way many industrial organizations can embrace this – and already have – is by shifting process heater systems from fuel-burning to electric.

Pumps are integral to a wide variety of both industries and processes. When you monitor pump performance, you can lower operating costs, improve process throughput, and reduce downtime and schedule maintenance.

The BEVPOR BR range of filters by Parker Bioscience have been constructed with a unique Polyethersulphone (PES) membrane, offering the longest service life and therefore the most efficient and lowest cost of operation in sterile filtration of beer applications.

In this white paper, Mark White from Parker discusses the effect that ambient oil vapor levels can have on downstream compressed air quality and what to consider when looking for Technically Oil-Free compressed air to ISO8573-1 Class 0 or Class 1 for total oil.

Over 90% of manufacturing facilities world-wide use compressed air as part of their manufacturing process. However, this powerful utility is not without its problems, in the form of compressed air contamination. It is therefore common practice to install compressed air filters as part of a purification system to ensure contaminants are reduced and the system operates in a safe, efficient and cost effective manner.

Selecting the correct filter for the application should be approached from a methodical, questioning angle. If filters are application specific, meeting filtration specifications, physical and chemical conditions of the process must be considered before selecting the filter for the application.

This white paper explains the differences between oil lubricated and oil-free compressor technologies, the contamination risks associated with each, and how to mitigate those risks by installing the correct purification equipment required to deliver clean, dry, Technically Oil-free Compressed Air.

Grocery stores require produce to be disinfected before being shipped to their outlet on a regular basis in order to ensure cleanliness before it is sold to their customers.  If left untreated, fresh fruit can be subject to a number of different contaminates that can ultimately adversely affect the consumers health. As the public is more conscious than ever about the substances and chemicals that they ingest, ensuring that produce does not harbor microbes is critical.

With the advent of industry buzzwords like "Collaborative Robotics" and "Industry 4.0", machine builders of today are feeling increased pressure to provide a new level of intelligent and flexible automation. A revolution taking place in the industrial marketplace is the Industrial Internet of Things, which describes an industrial network of devices embedded with electronics, software, and sensors, capable of collecting and exchanging data to more effectively and efficiently drive machine behavio...

There are very few elegant solutions for mid-to-large scale heavy industrial applications that require compact, high-temperature heating sources capable of delivering precise heat energy to a targeted location.

In recent years, portable filtration units, often referred to as filter carts, have become a common tool in the lubrication professional's arsenal. Increasing demand for these systems has led to the development of a wide range of new products and driven down prices, which is a good thing. When filter carts first came onto the scene they were primarily used by service providers for decontaminating large systems. These early models were typically designed for low viscosity oils in large volume sys...

Operational efficiency is a critical factor in the fluid processing industry. The synergy of fitting components and assembly technology to achieve this objective is the focus of Fit-LINE, Inc. Applying extensive polymer technology and injection molding expertise, the company has analyzed the design, tooling and manufacturing processes required to create high-performance solutions for demanding high-purity fluid processing applications. Through extensive R&D, testing and evaluation, Fit-LINE ...

The purpose of a filter is to remove contaminants from a fluid stream either completely, or at least down to a given rating or specification. Filters are used to help control contaminants and are rated according to their ability to remove these contaminants from a liquid, gas or air stream. There are different methods in which the performance of filters are specified.

There are two strategies for reducing control valve noise:

1. Source control, that is doing something to the valve to make it less noisy, and

2. Path control, that is doing something to prevent the noise from reaching the people who would be bothered by it.

I was recently asked how the pressure at the vena contracta of a control valve in a liquid application can be determined. I am sharing my answer below.

Perhaps the most misunderstood area of control valve sizing is the selection of the pressure drop, p, to use in the sizing calculation

We will briefly discuss what causes aerodynamic noise and some of the things that can be done to reduce aerodynamic noise generated by control valves.

Answer a number of key questions to identify the most appropriate choice

At process plants, a significant percentage of measurement devices aren't correctly matched to their application, leading to decreased quality and consistency of the operation. Often, the source of this problem is the assumption that one type of level measurement sensor suits multiple applications.

For most systems, in order to get good control with stability throughout the full range of required flow rates, we need to use a control valve that has an installed flow characteristic that is linear, or at least as close to linear as possible.