This video, courtesy of IAI, highlights another example of the IAI America ROBO products in an automated inspection process.
The ROBO Gripper first grabs an assembly part; then the ROBO Cylinder linear actuator moves the part under the inspection camera. The ROBO Rotary rotates the part so that the top-mounted camera can inspect all sides of the part.
If the assempbly part is good, then it is dropped into the OK bin; if the part is not acceptable, it is discarded into the 'No Good' (NG) bin.
Since the assembly part dimensions can vary, there are fewer adjustments to make with ROBO Cylinders than with old air cylinder equipment, providing for increased productivity.
Actuators: RCP2-SA6 electric slider, RCP2-RTB electric rotary, RCP2-GRS 2-finger electric gripper.
Controllers: 3 RCP2 Controllers.
For more information about IAI products, please visit their website,
http://www.intelligentactuator.com/.
Printer-friendly version