In this comprehensive tutorial, Tom Trinh, Senior Application Engineer at Valin Corporation, walks you through the complete setup of the Oriental Motor AZD-KREP driver using Ethernet/IP. Whether you're a first-time user or a control systems engineer, this video covers everything from wiring and power supply to software configuration and parameter setup using the MEXE02 utility and Omron's Sysmac Studio.
What You’ll Learn:
- System configuration & power requirements
- Ethernet/IP connectivity and daisy-chaining
- Using MEXE02 to configure drive parameters
- Input/output assignments & control pins
- Byte structure for communication between PLC and driver
- How to set speed, acceleration, deceleration, and position
- How to execute incremental motion via PLC
- Live demo of hardware and software in action
Devices/Software Covered:
- Oriental Motor AZD-KREP driver
- Omron NX PLC
- MEXE02 configuration utility
- Sysmac Studio
If you have any questions or are just looking for some help, we're happy to discuss your application with you. Reach out to us at (800) 774-5630 or fill out our online form.