Parker Modular Valve - ProBloc Series

Parker’s ProBloc series modular valves are designed to replace conventional multiple-valve installations currently in use for interfacing with pressure measuring systems. The traditional way of creating a double block and bleed valve was to use three separate single isolate ball valves, a tee piece to join them together and a flanged weldolet to connect to the process pipeline. This was modified to bolt three valves together using through bolts and was referred to as a modular valve.

No supporting is needed as the modular valve is  small and light compared to the original method, It is easier to operate as the three valves are much closer together. By building three valves into one body to create double block and bleed valve you reduce the amount of potential leak paths, reduce the weight which is critical in offshore facilities, reduce the size and therefore the space taken up, very important offshore but also in onshore applications.

By combining customer-specified ball and needle valves into a single manifold, Parker’s ProBloc modular valves significantly reduce the number of potential leak paths. They also have a lower system mass. This reduces loading and vibration stresses, further improving safety and reliability.

Parker’s ProBloc valves are available in a range of configurations, including double-block, block-and-bleed, and block-bleed-block. Standard flange sizes include 1/2", 3/4", 1”, 1-1/2”, 2” and 3”. There are extensive choice of flange classes, from ANSI 150 to 2500. The pressure rating and operating temperature range depend on the type of valves specified by the customer.

There is a choice of 10, 15, 20 and 25 mm ball valve bore sizes. The standard outlet has a female NPT connection and matches the size of the valve bore. A wide range of alternative metric sizes, from 6 to 25 mm, and imperial sizes, from 1/4" to 1” is available, and other connection options include male NPT, and Parker CPI© single ferrule and A-LOK™ double ferrule compression fittings.

Parker Modular Valve - ProBLoc Series Features:

• Reduced leak paths
• Less weight and space required
• No welded joints
• No support required
• Ease of operation
• In situ calibration
• Simple design
• One piece forged construction
• API and DIN standard versions
• Reduced installation costs
• Corrosion resistant alloys

Parker Modular Valve - ProBLoc Specifications:

BORE SIZE (MM):    20mm, 15mm, 10mm, 25mm, N/A
MATERIAL:    316 Stainless Steel, Carbon Steel, Duplex
VALVE CONFIGURATION TYPE:    Flange x Screw
CONFIGURATION:    Ball-Needle-Ball
FLANGE SIZE (INCH):    1/2", 3/4", 1", 1 1/2", 2"
FLANGE FACE:    Raised Face Spiral, Ring Type Joint
ANSI FLANGE CLASS:  150, 300, 600, 900, 1500, 2500
CONNECTION SIZE (INCH):    3/4" NPT F, 1/2" NPT F, 1" NPT F, N/A
SEAT MATERIAL:    PEEK, PTFE, PHLEX
HANDLE:    Stainless Steel Lever
CERTIFICATES:    N/A, NACE, Fire Safe
MAXIMUM WORKING PRESSURE (PSI):    275, 720, 1440, 2160, 3600, 6000, 285, 740, 1480, 2220, 3705, 6170, 290, 750, 1500, 2250, 3750, 6250
MAXIMUM WORKING PRESSURE (BAR):    19, 50, 99, 149, 248, 414, 20, 51, 102, 153, 256, 426, 52, 103, 155, 259, 431
MAXIMUM WORKING TEMPERATURE (C):    232, 204
MAXIMUM WORKING TEMPERATURE (F):    450, 400
MINIMUM WORKING TEMPERATURE (C):    -29
MINIMUM WORKING TEMPERATURE (F):    -20
INDUSTRY APPLICATIONS:    Instrument Isolation, In Situ Calibration, Inline Process Isolation, Chemical Injection, Process Sampling
INDUSTRY STANDARDS:    API 6A, API 607, PRL 2, PSL 2, PSL 3, PSL 4, TAMAP, MESC SPE 77/312

Contact us at (855) 737-4714 to learn more, or fill out our online form.