Naftosense FLD-MXM Multiplexed Monitoring Module

FLD-MXM Multiplexed Monitoring Module 

 FLD-MXM Multiplexed Monitoring Module
FLD-MXM Multiplexed Monitoring Module

FLD-MXM is an intrinsically safe high-performance multiplexed monitoring module designed long line applications. FLD-MXM was built monitoring large arrays of leak detecting cables for rapid response to refined products, crude oils, or organic solvents. The device is engineered for outdoor installation in challenging hazardous and environmental conditions. The measurement frontend is designed for interfacing with reusable, fully passive hydrocarbon sensor cables and sensing probes manufactured by Naftosense.


Each individual FLD-MXM multiplexed monitoring module can support up to 16 individual sensor sections not exceeding 82 ft (25 m). Advanced measurement techniques and data treatment algorithms are used to provide intelligent thresholding for eliminating the nuisance alarm due to the presence of motor/lube oils, greases, residues of old leaks, etc.

This monitoring module is controlled through the Naftosense ERBUS proprietary field bus allowing reliable communication over distances exceeding 6.2 Miles (10 km). ERBUS provides also provides low voltage power supply to each FLD-MXM from a single multiplexed lead wire attached to a FLD-TSP7 or FLD-SMP-MB.

FLD-MXM is approved for installation in classified locations according to FM, Atex, IECEx and other North American approvals. Designed only to be used with FLD-TSP7 and FLD-SMP-MB controllers.
 


Naftosense FLD-MXM Multiplexed Monitoring Module Features

  • Detects reliably viscous hydrocarbons at very low temperatures
  • True multi-leak capability
  • Real-time transmission of sensor contamination
  • Intelligent thresholding
  • Low power consumption for reliable remote monitoring over long distances
  • Very wide operating temperatures range
  • Able to detect the vapors diffused in the soil after spill from underground pipes
  • 10-year warranty


Naftosense FLD-MXM Multiplexed Monitoring Module Applications

  • Leak detection in Oil & Gas facilities
  • Detection of leaking fuel from airport hydrant systems, military, custody transfer generators and plumbing in demanding environments installations in harsh outdoor, demanding environmental conditions
  • Leak detection in refineries, tank farms, mainline pipe sections, or repair sites
  • Leak detection in commercial buildings, downstream and fuel retail facilities


Naftosense FLD-MXM Multiplexed Monitoring Module Approvals

Approved for use in:

  • In the US: Intrinsically safe - Class I, Division 1, Groups A, B, C and D, Class I, Zone 0, AEx ia IIC
  • Atex: Intrinsically safe II 1 G, Ex ia IIC Gb T4
  • IECEx: Intrinsically safe Ex ia IIC Gb T4
  • Tested by FM Approvals for compliance as per FM Class 3610

 

Download Naftosense FLD-MXM Multiplexed Monitoring Module Datasheet 



Talk to one of our automation experts today at (855) 737-4718, or fill out our online form to learn more.
 

Short description

FLD-MXM is an intrinsically safe high-performance multiplexed monitoring module designed long line applications. FLD-MXM was built monitoring large arrays of leak detecting cables for rapid response to refined products, crude oils, or organic solvents.