ProComm GO Signal Converter from McCrometer

ProComm GO Signal Converter from McCrometer
The battery-powered signal converter is the reporting, input and output control device for the electromagnetic flow meters. It is available as meter mount or remote mount.

The converter allows the measurements, functional programming, control of the sensor and data recording to be communicated through the display and inputs & outputs.

The microprocessor-based signal converter has a multi-point curve-fitting algorithm to improve accuracy and a rugged enclosure that meets IP67.

The microprocessor continually monitors the converter’s functionality. The converter will output rate of flow and total volume.

The converter also comes many more features that is fully user-configurable using the configuration tool via the USB port and a laptop computer.

 

ProComm GO Signal Converter Specifications:

Altitude:Operating: 2000 m
Storage: 12,000 m
Analog Outputs:4 - 20 mA: Galvanically Isolated, 16 Bit resolution. All power configurations (including battery). Note: 9-30 VDC loop power required (not supplied via converter)
Connection Options:Optional shielded cable for 10 - 32 VDC/4-20 mA output
Optional shielded cable for pulse out
Data Logger:Standard with all models, minimum of five years of data stored
Display:
  • 2-Line LCD display (no backlight)
  • Non-volatile memory
  • Anti-reverse totalizer (standard)
  • Total (to 9 digits of precision)
  • Flow rate and velocity (to 5 digits of precision)
  • Two alarms: low battery and empty pipe (optional)
  • Opening lid activates display
  • Digits: 5 Rate, 9 Total
Electrical Certifications:IEC 61010-1, Pollution Degree II
Overvoltage protection Category III
Housing Details:Diecast aluminum, powder coated enclosure w/ tamper resistant seal, 6½” x 6½” x 43/8” tall
Indoor/Outdoor:IP67 Die cast aluminum converter
Operating Temperature Range:4° to 140° F (-20° to 60° C)
Options:Data Logger - included as standard with five years of data storage at default (12 hr) interval. (Cable sold separately)
AC, DC, and battery powered with battery backup powered available
Outputs:Digital output:
  • Digital pulse (open collector) output for volumetric
  • Two isolated digital pulse (open collector) outputs for volumetric
  • AMI output
Power:Battery: Standard: three 3.6V lithium-thionyl chloride (Li-SOCI2) D size batteries with two AA backup batteries
AC Power: 100 - 240 VAC/45-66Hz (4W)
DC Power: Linear power supply 10 - 35VDC (4 W)
Relative Humidity:0% to 100%
Standard Storage Temperature:-4° to 140° F (-20° to 60° C)

 

Download McCrometer ProComm Coverter Series Comparison Chart


Contact us at (855) 737-4714 to learn more, or fill out our online form.

Process Control
A lesson for me is that I need to involve you earlier in the program.

You were tireless in your support and it will not be forgotten!

Valin Was There For Us
When we needed technical assistance and applications support, Valin was there for us. Their knowledgeable engineers saved us an invaluable amount of time, helping us get up and running quickly. We are very happy with their services.