Velcon VF Performance Filter Housings

Velcon Aquacon Filter Cartridge Housings

Velcon Aquacon Filter Cartridge Housings

Clean Dry Fuels and Oils with High Performance Aquacon Filter Cartridges

The VF-61, and VF-62 are versatile filter housings designed for use with several different high performance Aquacon filter cartridges, as well as a variety of paper filters and coalescer/separator cartridges.

Aquacon cartridges filter out water by chemically locking it into layers of super-absorbent media. Common surfactants or additives do not affect water removal efficiency. Water capacity is as much as 11/2 quarts, depending on the flow rate. These cartridges also effectively filter out dirt, rust and other particulates. As a cartridge reaches its water-holding limit, the media expands very rapidly and restricts the flow. For oils and other high viscosity liquids, the pressure drop will rapidly increase, signaling the need to change cartridges.

The VF-61, with ACO series cartridges installed, has become the standard for low flow rate full flow aviation fuel monitor applications. Use the VF-61E with band clamp closure for areas with
limited space.

Velcon Aquacon VF Series High Performance Filter Housings Features:

Free and emulsified water to less than 5 ppm
1/2 micrometer particulate removal
Provides protection against slugs of water
Pressure increase signals cartridge change
Use with existing filter housings

Velcon Aquacon VF Series High Performance Filter Housings Applications:

Jet Fuel
Insulating Oil
Avgas
Hydraulic Oil
Motor Gasoline
Lubricating Oil
Diesel Fuel
Biodiesel Fuel
Selected Solvents

Velcon Aquacon VF Series High Performance Filter Housings Specifications:

Filter Housing VF-61, VF-61E, VF-62

Maximum Operating Pressure: 150 psi
Inlet/Outlet Connection: 1 NPT
Closure Seal: Buna-N O-Ring (P/N G-0986) - brass petcock vent valve and drain valve
Material: VF-61, VF-62: Die cast aluminum head and closure clamp assembly; carbon steel shell with
epoxy coated exterior and interior.
Material: VF-61E: Die cast aluminum head; stainless steel band clamp; carbon steel shell with epoxy
coated exterior and interior.
Weight: VF-61: 10 lbs (Shipping Weight: 12lbs) VF-61E: 8 lbs (Shipping Weight: 10 lbs) VF-62: 16 lbs (Shipping Weight: 18 lbs)