Parker Fluoroflow® Cartridge

All-Fluoropolymer Cartridge for Aggressive Applications

The Fluoroflow® filter cartridge is our standard product for aggressive wet etch and clean applications. It provides good flow rates and on-stream life at an economical cost. The all-fluoropolymer construction provides excellent chemical resistance for the most aggressive applications up to 150C. It is available either ozone DI flushed and dried or wetpacked for quick installation.

Parker Fluoroflow® Cartridge Benefits:

Economical
Wet-pack option for quick installation
All-fluoropolymer for maximum chemical resistance
100% integrity tested for consistent quality

Parker Fluoroflow® Cartridge Applications:

Wet etch and clean
- Phosphoric acid
- Sulfuric acid
- Hydrofl uoric acid
- Nitric acid
- Piranha
- SC1,SC2
- NMP-based solvents
Other high temperature or ozonated processes

Parker Fluoroflow® Cartridge Specifications:

Materials of Construction
100% Fluoropolymer construction
All components are thermally bonded to ensure integrity and reduce extractables.

Effective Filtration Area
6.8ft2 (0.63m2) per nominal 10" (250mm) cartridge

Metals Extractables*
Standard: <20ppb (total)
Ultraclean: <5ppb (total)
*In a 10% HNO3 extraction

Maximum Differential
Pressure/Temperature
Forward:
80psid (5.5bar) @ 75°F (24°C)
55psid (3.8bar) @ 167°F (75°C)
30psid (2.0bar) @ 257°F (125°C)
15psid (1.0bar) @ 300°F (150°C)

Reverse:
50psid (3.4bar) @ 75°F (24°C)
15psid (1.0bar) @ 250°F (121°C)

Cleanliness (particle shedding)
Wet-packed:
<2 particles/ml >0.2m after 7gal @ 1gal/min

TOC/Resistivity Rinse-up (wet-packed)
TOC recovery within 3-5ppb of feed without additional rinse-up.
Resistivity recovery within 0.4megohm-cm of feed after 22gal @ 1gpm.