Transportation Filters

With Parker Velcon's barrier technology, current filtration equipment at FBO and fixed fueling sites with lower flow rate systems can easily adapt this alternative solution. Parker Velcon SAP-free barrier filtration provides a drop-in replacement for their monitor cartridges used in models VF-61 (5”) and VF-609 (6”) housings and similar competitors housings. The ACO-X™ Water Barrier Filters do not require the addition of any other equipment – simply remove the old elements and replace with new ACO-X™ elements. Unlike water absorbing elements, ACO-X™ elements repel water on the upstream (dirty) side of the element.

 

Aquacon® Cartridges have a patented construction for removing dirt and water from hydrocarbon and other oils as well as gases. The outer media layer filters out silt, rust and other particulate contaminants. The inner layers absorb water and chemically bond it so that no water will release downstream.

 

Velcon Coalescer Cartridges

Velcon single-unit coalescer elements are offered with threaded base or open ends and with fiberglass media combinations. Threaded Base Coalescers simplify installation and replacement by eliminating the need for cover plates, center plates, nuts, washers, and gaskets. They are for use in Velcon and other make filter/ separators.

 

Velcon DI/DSO Water Coalescing/Separation

Parker Velcon's DI coalescers in combination with DSO separators, contaminated fuels are cleaned to a level that meets stringent downstream fuel cleanliness standards for petroleum based diesel fuels. The first stage in the DI coalescer removes particles through an inside-out flow and coalesces emulsified water into large droplets, which then fall to the housing sump. In the second stage, an outside-in process, the DSO separator creates a hydrophobic barrier to block the coalesced water droplets from flowing downstream of the housing. This multi-stage design assures the fuel is conditioned to a clean and dry state, ready for use.

Velcon Pleated Filter Cartridge

Velcon's Pleated Filter Cartridges are high efficiency, long life cartridges with a large surface area that allows high flow rate with low initial pressure drop and maximum contaminant holding capacity. A resin impregnated media maintains strength, resists effects of water and heat while heavy gauge carbon steel endcaps and center tube give safety margin against pressure surges. Pleated filter cartridges are manufactured with coated steel components that resist corrosion from most industrial fluids.