Water Treatment Resources
Water Treatment
on Tue, 08/11/2020
Most people who are familiar with control valves have seen the formula for calculating the valve capacity (Cv) required to pass a given flow rate of water. This seems fairly straightforward until you ask yourself, what is the correct value of differential pressure to use?
on Tue, 07/21/2020
Maintaining a consistent internal environment for your enclosures is critical for the equipment inside to function properly. The National Electrical Manufacturers Association (NEMA) has defined a set of standards for specific types of enclosures designed for the application and environment when completely and correctly installed.
on Tue, 07/14/2020
When designing a pump system, the way the unit is powered must come into consideration. The two most prominent ways of powering a pump are via electrical power or compressed air.
Walchem has added a ton of new features to their W100, W600 and W900 Series controllers built around requests from their customers.
Public, media and regulatory attention has focused on the sanitary practices of production facilities, with almost no industry being exempt. The potential costs of recalls, fines and long-term brand damage is compelling producers to take additional steps to ensure consumer wellbeing.
Iwaki self-priming SMX series pumps are an ideal alternative to air operated double diaphragm (AODD) pumps when pumping chemicals.
SMX Series of magnetically driven non-metallic pumps offer an innovative true self-priming design with no mechanical seals for years of trouble-free service.
Walchem’s Amperometric Disinfection Sensors offer a cost-effective and reliable solution to your disinfection control requirements. Compatible with the WDIS and WebMaster® series controllers, the sensors continuously and directly measure the chemical concentration, without the use of reagents.
The Iwaki TC-X500 Series Metallic Flap Valve pumps are ideal for helping facilitate the transfer of large solids or heavy, slurry-laden liquids efficiently. Iwaki's unique design allows for easy cleanout of the valves even while the pump is still installed in the piping. Solids up to 1-3/4" can be easily pumped in the TC-X500 Flap pump even up to flows over 150 gallons per minute.
Walchem’s IX Series Metering Pumps are digitally controlled direct-drive diaphragm pumps. Years of experience in high-end motor technology result in extremely accurate and energy efficient metering pumps with high resolution.
A lesson for me is that I need to involve you earlier in the program.
You were tireless in your support and it will not be forgotten!