Valvcon® V-Series Electric Actuator

Submitted on Tue, 11/21/2017
VALVCON V-Series Electric Actuator
Metso’s Valvcon V-Series is a compact, rugged, reliable electric actuator designed for quarter-turn valve and damper applications. V-Series actuators are available in NEMA 4/4X and NEMA 4/4X/7&9 configurations, are CSA (C US) Certified, CE Compliant, and NEMA 4/4X/7&9 models are also certified to ATEX Directive 94/9/EC. V-Series actuators are available in a variety of control configurations from On/Off to Automatic Cycling, to Analog Modulating; with a host of other options available, they are extremely well-suited to a multitude of demanding process applications.

V-Series actuators provide several levels of protection against overloads and overheating.

Thermal Overload Breaker

If the motor is running too hot, for any reason, it will automatically be disconnected until it cools down. After cooling, it will resume normal operation.

Fuse Protected Input Power

On AC Hot and AC Common connections. If power is mis-applied, the fuses will isolate damage to the Motor Board, allowing for easy repair.

Auto-Resetting Fuses for Limit Indicator Outputs

Protect the limit switches and internal circuitry from overloads caused outside the actuator. The working limit is .25 amps, enough for any pilot or indicator applications. They reset automatically, approximately 3 minutes after the overload condition is corrected.

Stall Protection (Modulating Applications)

If the actuator cannot achieve the position commanded by the control signal, it will automatically disconnect power to the motor until the control signal commands the actuator to drive in the opposite direction.

Electrical Interference and Emissions

The actuator has been carefully designed to minimize electrical interference with other equipment. Emission levels comply with Part 15 of the FCC Rules for Class A electronic equipment.

  • Compact and lightweight
  • Modular design allows for field-installation of options and simple upgrades
  • Easy to use electronics with clearly labeled terminals and coded option connectors
  • High standard duty cycle
  • Agency approvals are standard
  • Wide range of options for various methods of control and interface to multiple valve types
  • Long-term reliability
  • No maintenance required
  • Low cost of ownership
  • Easy installation and set up


Download Metso's Valvcon V-Series Electric Actuator Brochure

Talk to one of our experts today at (855) 737-4714, or fill out our online form to learn more.