ROBO Cylinder RCP6 Reduce Operation Time and Production Costs

A wide variety of product types are in the new RCP6 series, which also include wide slider types and wide radial cylinder types. Allowable dynamic moment for the wide slider type is 14 times higher than the standard slider. Allowable torque on the rod type of the wide radial cylinder is 3 times higher than the standard radial cylinder.

Equipped with the High Resolution Battery-less Absolute Encoder as Standard

No battery maintenance is required because there is no battery. Since home-return is not required at equipment startup or after an emergency stop, this feature reduces operation time and production costs.
Improved Positioning Repeatability for Standard Specification: ±10μm

±20μm of positioning repeatability for the current ROBO Cylinder has improved.

Selection of PowerCON® Compatible Controllers Is Available

The RCP6 is compatible with PowerCON, the controller equipped with a high-output driver.

The stepper motor achieves higher output, thanks to the PowerCON. This has reduced production cycle time, leading to improved productivity.

You can choose from two controllers with PowerCON: the "separate type" and "built-in type".

RCP6S Actuator with Built-in Controller

16 axes of RCP6S at max. are available to connect from one gateway unit.  A maximum of 16 axes of RCP6S (relayed through a hub unit) can be connected to one gateway unit. In addition, the gateway unit can supply the motor power and control power needed for all connected axes, therefore only requiring one cable (power and communication line) for the RCP6S.

The RCP6S actuator with built-In controller has the following advantages:
  • Control panel can be smaller
  • Wiring can be easier
  • Reduced maintenance parts since a common cable is used

ROBO Cylinder Series Product Types
  • Rod Type
  • Radial Cylinder Type
  • Wide Type
  • Table Type
  • Slider Type

Features of the Wide Type

(1) Wide Slider Type
Allowable dynamic moment is 14 times higher than the standard slider

(2) Wide Radial Cylinder
Allowable torque on the rod tip is 3 times higher than the standard radial cylinder

Download RCP6 Overview

Download RCP6 Catalog



Call us today at (855) 737-4716 to learn more, or fill out our online form and someone will get back to you.