Filtration

Traditional process stream carbon adsorption has utilized relatively large loose carbon granules. The carbon granules are typically held within replaceable filter canisters.

Actril™ Cold Sterilant Demonstrate Complete Inactivation of 229E Human Coronavirus Strain in 5 Minutes!

Concerned about COVID-19 Coronavirus? Cantel recently had a third-party laboratory verify the efficacy of its Actril™ and Minncare™ Cold Sterilant on hard, non-porous surfaces. The test demonstrated a complete inactivation of the 229E human coronavirus strain in 5 minutes.

Having fully reviewed the data presented as a result of extensive internal and external robustness testing, members of the Energy Institute Aviation Fuel Filtration Committee (EI AFFC) on Wednesday (February 12th) approved the Parker Velcon CDFX™ Filters for field trials.

Varnish is a common problem for a wide range of hydraulic fluids and lubricants, especially in turbine and plastic injection molding applications. It results in valve sticking, shorter fluid life, shorter filter life and unscheduled downtime.

Parker Velcon's CDFX™ water barrier technology was developed as a ‘drop in’ solution for the aviation refueling market to meet the new requirements of the Energy Institute stating that all absorbent SAP elements be removed from service by end of 2020

Compressed air contamination problems can be simply avoided by installing a Parker Zander OFAS HL Oil Free Air System fitted (including OIL-X filtration). The fully integrated heatless compressed air dryer and filtration packages are suitable for use with any compressor type. Learn more.

Des-Case rolls out a new and improved, patent-pending breather construction. More desiccant and increased airflow without increasing the external dimensions of the breather.

In an effort to better serve our refining customers, Valin has created a new knowledge center group of highly technical people familiar with the needs of refineries.

Parker Velcon CDF-X™elements are currently going through robustness testing at two major airports in the U.S. This is part of the testing program to determine if the elements will be safe for into-plane field evaluation. Learn more.