The Model 7C has a 1.025" probe and all the features and benefits of the Stroke-to-GO™ cylinder position sensor product line.
Stroke-To-GO™ cylinder proximity sensors provide precise end-of-stroke position indication on pneumatic and hydraulic cylinders. Designed to exceed automotive industry standards, the housing is machined from stainless steel bar stock to handle pressures to 3,000 PSI (206 bars) operating (tested to UL's 4X burst requirement) while withstanding the extreme external conditions such as weld slag, coolants, cutting fluids, physical abuse, and even high temperatures. Stroke-to-GO™ incorporates the same 70 Series GO™ Switch mechanism that has been proven in the field in the most rigorous applications. This unique design offers the greatest benefits in cylinder position end-of-stroke indication.
Features
GO™ Switch Stroke-to-GO™ Model 7C Features
- SPST form A and form B contacts
- SPDT form C contact arrangement
- LED indication
- 204°C (400°F) operating temperature
- Sub-Sea capabilities
- Quick disconnect connectors
Specifications
GO™ Switch Stroke-to-GO™ Model 7C Specifications
- Leakage current:
- Without LEDs - none
- With LEDs - <1.7mA
- Voltage Drop:
- Without LEDs - none
- With LEDs - <5V (SPST)
- Wash-down: designed to withstand 1,000 PSI wash-down and NEMA 6P with Mini-Change® type connector option
- Weld Field Immune: tested and exceeded General Motors EHS-320 specifications. Testing Agency - Candid Logic
- Radio Frequency Interference (RFI): no affect at any frequency
- Specifications - Housing Size: Standard probe lengths: 1.025" (26 mm), 1.250" (32 mm) and 2.062" (52mm). Custom probe lengths:** 1.000" (26 mm) - 5.000" (127 mm)
- Materials: Stainless Steel bar stock
- Conduit Outlet: Mini-change standard
- Sensing
- Target Material: Ferrous Sensing Range: Approx. .090" (2 mm) end sensing (3,000 PSI) (Recommended air gap .015" - .040")
- Contacts
- Materials: Palladium silver
- Form: Single Pole, Double Throw, Form C (w/ or w/o LED indication) Single Pole, Single Throw (w/ or w/o LED indication) Form A or Form B
Q & A
GO™ Switch Stroke-to-GO™ Model 7C Q & A
It refers to the switch’s ability to detect position anywhere along an adjustable stroke length rather than only at a fixed point. This allows users to:
- Set custom actuation points
- Monitor partial or full valve travel
- Achieve flexible position sensing
- Stainless steel enclosure
- Hermetically sealed contacts
- Non-contact sensing
- High shock and vibration tolerance
- Long service life vs mechanical switches
- Linear control valves
- Rising stem valves
- Sulfur recovery units
- Gate and globe valves
- Damper monitoring
- Hydraulic or pneumatic actuators
- No physical contact → reduced wear
- Higher reliability
- Better sealing
- Less maintenance
- Longer lifespan
Downloads
TopWorx™ GO™ Switch Sensing Solution Brochure
Call us today at (855) 737-4714 to learn more, or fill out our online form and someone will get back to you.