FG-ODC+ Hydrocarbon Sensing Cables

FG-ODC+ Hydrocarbon Sensing Cables
TTK's FG-ODC+ is a digital sensing cable for detection and location of liquid hydrocarbons and liquid insoluble in water and their vapors, along the entire length of 9 ft. It allows multiple leak detection and location thanks to independent digital addressing, enabled by an embedded microchip in each FG-ODC+ sensing cable. The sensor element is optimized for a very fast response with light to middle distillates. It is sensitive to heavy oils such as conventional crude oils, dilbit/synbit, as well as to hydrocarbon vapors. It can be installed in a humid environment as it is insensitive to water and inorganic contamination.
  • Very high Sensitivity
  • Very Fast Response with Light and Middle Distillates
  • Sensitive to Heavy Oils and Hydrocarbon Vapors
  • Leak Location on Section Length
  • Pre-connected Cable
  • Suitable for Explosive Area Service
  • Insensitive to Water and Inorganic Pollutants


FG-ODC+ Hydrocarbon Sensing Cables Features

  • Standard length (9 ft) sensor sections or long line sections allowing optimized system architecture
  • Microcontroller embedded in each FG-ODC+ sensing cable allowing the independent digital transmission to the alarm unit
  • Standard length sensing cable provided with the built-in plug-socket connector
  • Structure of the sensing cable comprising a silicon sensing wire, a continuity wire, a communication wire (proprietary bus) and the power supply wires. Protective external PE braid built on the cable
  • Intrinsically safe – can be used in classified areas: Ex ia IIB T4 Ga (IECEx “Zone 0”)


FG-ODC+ Hydrocarbon Sensing Cables Benefits

  • Reliable detection:
    • Sensitive to heavy oils and vapors
    • Insensitive to water, inorganic pollutants and external loads (pressure)
  • Very high sensitivity: examples of detection time: Diesel at 3-5 minutes (*), Gasoline: less than 1 minute (*)
  • Detects and locates hydrocarbon leaks on the section length
  • The same unit FG-NET can be connected to FG-ODC+ sense cables and mixed with water or acids/bases sense cables at the same time
  • Easy to install and remove: standard FG-ODC+ cables pre-connected with male / female connectors

Note (*): depending on liquid composition and leak conditions

Download FG-ODC+ Hydrocarbon Sensing Cable Datasheet


To see additional leak detection solutions, visit the TTK Liquid Leak Detection page.

Call us today at (855) 737-4718 to learn more, or fill out our online form and someone will get back to you.
Process Heat
A lesson for me is that I need to involve you earlier in the program.

You were tireless in your support and it will not be forgotten!

Valin Was There For Us
When we needed technical assistance and applications support, Valin was there for us. Their knowledgeable engineers saved us an invaluable amount of time, helping us get up and running quickly. We are very happy with their services.