Heat Trace CablesMiles of Heat Trace Cables In-Stock and Ready to Ship Today!
Valin carries heat trace cables that are suitable for process maintenance, pipe and vessel freeze protection and roof and gutter de-icing applications. With this wide variety of cables available we can design systems for the most demanding and complex applications while helping reduce costs, increase sustainability, and decrease risk.
Valin's team can assist with...
- Measuring pipe run
- System design
- Start-ups and commissioning
- Isometric drawings
We have an incredibly knowledgeable team of customer service and application engineers just a phone call away to
answer all of your questions.DID YOU KNOW?
Valin will pay the freight on orders over $1,000 and offers same day shipping!
Self-Regulating Heat Trace Cables
Self-regulating cables are flexible, can be cut-to-length in the field and can be single overlapped without fear of burnout in areas where complex piping and equipment require additional heat trace cable. Heating cable are manufactured for use on 120 and 208 to 277V and maintain temperatures to 302 °F (150 °C). Equipped with a ground braid and optional TPR or FEP jacket, self-regulating cables are third party tested and approved for use in harsh corrosive and hazardous area applications.
2000 Series Industrial Self-Regulating Heating Cable
The 2000 series of self-regulating heating cables are designed to supply a specified amount of heat at any point along their length in direct response to local temperature variations. These cables can maintain temperatures up to 375°F (190°C) and will withstand 190 psig saturated steam purging and intermittent temperature excursions to 450°F (232°C) with power applied. 2000 series cables can be cut to length and terminated in the field, and will not overheat or burnout when overlapped.
2300 Series Industrial Self-Regulating Heating Cable
The 2300 series of self-regulating heating cables are designed to supply a specified amount of heat at any point along their length in direct response to local temperature variations. These cables can maintain temperatures up to 250°F (120°C) and will withstand 150 psig saturated steam purging and intermittent temperature excursions to 366°F (185°C). 2300 series cables can be cut to length and terminated in the field, and will not overheat or burnout when overlapped.
HTS-6 Self-Regulating Commercial Heat Trace Cable
The HTS-6 commercial grade heater cable is designed for use in both indoor and outdoor locations as well as for residential and commercial freeze protection on water pipes and drain pipes. In roof and gutter applications, the HTS-6 provides a pathway for flowing water on the roof or in gutters and downspouts to safely distance itself from the building before the opportunity to re-freeze and cause damage.
2700 Series Industrial Self-Regulating Heating Cable
The 2700 series of self-regulating heating cables are designed to supply a specified amount of heat at any point along their length in direct response to local temperature variations. These cables can maintain temperatures up to 150°F (65°C) and survive intermittent exposure up to 185°F (85°C) with power applied. 2700 cables can be cut to length and terminated in the field, and will not overheat or burnout when overlapped.
Hazardous Area High Temperature Heat Cable
The Series KK high-temperature constant wattage heating cable is ideal heating long run applications that require high temperature extreme flexibility up to 500°F. Constant Watt is manufactured with precise and constant temperature output regardless of ambient and surface temperatures. The easily installed cable can be cut to length and terminated at the job site and is approved for both ordinary and hazardous area environments.
MI Mineral Insulated Heating Cable
MI mineral insulated heating cables provide rugged and reliable heat tracing for a variety of demanding applications. The high nickel alloy sheath, magnesium oxide dielectric insulation and resistance wire construction allow the tracing of equipment up to 1100°F maintenance temperatures and excellent resistance to many corrosive environments. At lower temperatures, watt densities of up to 50 W/Ft can be designed. Please contact factory for cable maintenance temperature above 400°F.
Industrial Heating Tape
AWD Duo-Tapes® and AWH Mono-Tapes® are heating tapes that have been specifically designed for industrial use – such as vacuum bake-outs, exhaust gas sampling and hot melt transfer pipes. These heating tapes work well for those applications that require a helping hand. When the temperature requirements exceed the capabilities of the elastomeric heating element, AWD and AWH heating tapes will allow for the temperature requirements to be met safely and efficiently.Prevent Your Systems from Freezing up by Partnering with Valin and our Full-Service Heat Trace Solutions Team
Fill out our heat trace application form and we will have one of our process heating experts contact you, or call (855) 737-4718 to speak to one of our experts immediately.